9406-26

Series:	9406
Packaging:	Bulk
Part Status:	Active
Type:	--
Material - Core:	Ferrite
Inductance:	15µH
Tolerance:	±10%
Current Rating:	305mA
Current - Saturation:	--
Shielding:	Shielded
DC Resistance (DCR):	2.35 Ohm Max
Q @ Freq:	66 @ 2.5MHz
Frequency - Self Resonant:	16MHz
Ratings:	--
Operating Temperature:	-55°C ~ 125°C
Inductance Frequency - Test:	2.5MHz
Mounting Type:	Through Hole
Package / Case:	Radial - 4 Leads
Supplier Device Package:	--
Size / Dimension:	0.500" L x 0.375" W (12.70mm x 9.53mm)
Height - Seated (Max):	0.375" (9.53mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Fixed Inductors Inductors, also known as coils, chokes, or reactors, are passive electrical components that store energy in the form of a magnetic field. They consist of a wire-wound core of many turns and two terminals through which current flows. Inductors are used in a wide variety of circuits, from high-frequency amplifiers to power supply filters. One particular type, known as the 9406-26, is particularly well-suited for applications where relatively low impedance across a range of frequencies is required.The 9406-26 fixed inductor is designed to operate at maximum efficiency in high-frequency and high-power applications. It has a small physical size compared to other inductors, making it ideal for when space is tight. It has a ferrite core, which provides the highest possible power rating for a given size. Additionally, the 9406-26 is designed with a winding pitch that reduces the inductance caused by the windings, improving frequency-dependent behavior. The core and windings are further potted to protect against mechanical and electrical damage. The 9406-26 has a wide range of applications in power and RF circuits. Its small size and high power rating make it an excellent choice for high-power filters and RF amplifiers. It is also useful for signal isolation, matching, and impedance transition. In addition, it is ideal for use in DC-DC converters, pulse circuits, and other high-frequency applications. The working principle of the 9406-26 fixed inductor is based on the principle of inductance, which is the ability of a conductor to store energy in a magnetic field. When an electrical current passes through a conductor, it creates a magnetic field that stores energy. The more turns a conductor has, the more energy it can store. When the current is removed, this stored energy is released back into the circuit in the form of an induced voltage. This induced voltage is what makes the 9406-26 useful in high-frequency circuits. As the frequency of a signal increases, the inductor acts as a low-impedance path, allowing the signal to flow more easily than if it were just passing through a resistor. The inductor also helps to reduce noise caused by high-frequency transients, further improving the signal fidelity. In summary, the 9406-26 fixed inductor is suitable for applications that require low impedance across a range of frequencies. It is designed with a ferrite core and windings, providing a high power rating in a small physical size. It also has a winding pitch that reduces the inductance caused by the windings, providing improved frequency-dependent behavior. The 9406-26 is useful for RF amplifiers, power and signal filters, pulse circuits, and DC-DC converters. Its working principle is based on the principle of inductance, which is the storage of energy in a magnetic field. This storage of energy allows it to act as a low-impedance path for high-frequency signals, providing improved signal fidelity and reduced noise.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description