95J10RE

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through hole resistors are used in a wide variety of applications in electronic circuits, including power distribution, signal control, ground isolation, and capacitor switching. The resistor type commonly referred to as 95J10RE is particularly useful in providing current limiting and voltage protection to downstream components.

The 95J10RE is a 3-terminal resistor that has a fixed resistance value of 9.5 ohms. It is designed to be placed between two high current points in order to provide a controlled resistance to the current flow. The third terminal is used to measure the current flowing through the resistor and is typically connected to a meter or other device that measures voltage and current.

The working principle of the 95J10RE is based on the physical properties of semiconductors. When an electric current flows through a semiconductor material, an electric field is generated and this alters the way electrons move through the material. The electric field around a semiconductor resistor has a characteristic pattern which affects the flow of electrons and is determined by the value of the resistor.

In the case of the 95J10RE, the generated electric field has a very high resistance to current flow. This means that the resistance of the resistor will remain constant even when the current increases. This makes it perfect for use in applications where the current must be strictly limited, such as in circuits which control the operation of motors or other devices that require high currents.

In addition to its use in limiting current, the 95J10RE can also be used to provide a voltage protection function. This is achieved by connecting the resistor between the positive and negative terminals of the device that needs to be protected. When the voltage of the device exceeds a certain level, the current flowing through the resistor will increase and this will limit the voltage that is applied to the protected device, thereby providing protection from overvoltage.

The 95J10RE can also be used as a ground isolation device. In this application, the resistor is connected between two ground points in order to create an isolation zone which prevents electrical current from flowing between the two points. This is useful in circuits which require a certain level of isolation from the ground, such as where sensitive electronic components are present.

The 95J10RE is a versatile device that is used in a variety of applications. It has the ability to provide both current limiting and voltage protection, making it an important tool for protecting downstream components from damage caused by overcurrent and overvoltage conditions. The resistor is also useful as a ground isolation device, enabling it to be used in circuits which require a higher level of isolation from the ground.

The specific data is subject to PDF, and the above content is for reference