Allicdata Part #: | 9755017026-ND |
Manufacturer Part#: |
9755017026 |
Price: | $ 1.18 |
Product Category: | RF/IF and RFID |
Manufacturer: | Laird Technologies EMI |
Short Description: | TWT,STR,SNB,PSA,CTL .30X.230X.09 |
More Detail: | N/A |
DataSheet: | 9755017026 Datasheet/PDF |
Quantity: | 1000 |
950 +: | $ 1.07717 |
Series: | * |
Part Status: | Active |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The term 9755017026 refer to RFI and EMI - Contacts, Fingerstock and Gaskets which are all components used in various applications. RFI and EMI contacts are designed to attenuate the electromagnetic interference (EMI) that can interfere with the operation of electronic systems. They are made from high-conductivity metals, such as copper or silver, and are available in a variety of shapes and sizes. Fingerstock and gaskets are used in a variety of applications, such as sealing electrical components from dirt and moisture, preventing signal leakage and providing additional mechanical support. This article will discuss the various applications and working principles of RFI and EMI contacts, fingerstock and gaskets.
RFI and EMI Contacts
RFI and EMI contacts are used to prevent signals from passing between two electrically isolating surfaces. The contact is usually made from a conductive material and has a static contact area that may range from a few square millimeters to several square centimeters. The contact area is typically covered with an insulator, such as Mica, to ensure that the electrical currents from the two surfaces remain separate. The contact is usually made in two sections: the keeper section, which connects the two surfaces, and the conductive section, which connects the two surfaces in order to create an electrical circuit. The conductive section is designed to ensure minimum contact resistance and maximum current carrying capacity.
RFI and EMI contacts are used in a variety of applications including consumer electronics, computer equipment, aircraft, satellite communication and broadcasting, and military applications. RFI and EMI contacts are designed to provide an effective shield of EMI radiation and to dissipate any heat generated during operation. In most applications, RFI and EMI contacts are also designed to prevent water and other contaminants from entering the electrical circuits.
Fingerstock and Gaskets
Fingerstock and gaskets are components that are used in various applications to seal components and to reduce noise. Fingerstock is made from high-conductivity metals, such as copper or silver, and is designed to reduce the amount of electrical noise that can be generated between electrical components. Fingerstock is available in many different shapes and sizes to meet the requirements of different applications. Gaskets are typically made from paper or plastic film and are designed to create a tight seal between two surfaces. Gaskets are also used to provide a mechanical support and to reduce the amount of vibration and noise that can occur between two surfaces.
Fingerstock and gaskets are used in a variety of applications such as computers, telecommunications equipment, aircraft, and military applications. Fingerstock and gaskets can be used to prevent signal leakage, to reduce the amount of EMI radiation, and to increase the current carrying capacity of electrical contacts. They can also be used to reduce the amount of mechanical vibrations and to reduce the amount of electrical noise that can be generated from one component to another.
Working Principle of RFI and EMI Contacts, Fingerstock and Gaskets
The working principle of RFI and EMI contacts, fingerstock and gaskets is simple yet effective. The contacts and gaskets are designed to provide a shield of EMI radiation and to dissipate any heat generated during operation. Fingerstock is designed to reduce the amount of electrical noise that can be generated between electrical components. In order for the components to achieve a low-resistance connection, the contact surfaces are typically covered with an insulator, such as Mica, to ensure that the electrical currents from the two surfaces remain separate. Gaskets are designed to create a tight seal between two surfaces to prevent signal leakage, reduce vibration, and reduce the amount of electrical noise that can be generated from one component to another.
RFI and EMI contacts, fingerstock and gaskets are essential components for many electrical and electronic systems. They are designed to provide a reliable connection between two surfaces and to help reduce the amount of EMI radiation and electrical noise that can occur. These components are also designed to provide additional mechanical support and to reduce vibration and noise. As such, they are an essential part of many electrical and electronic systems.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
5962-9755701HPC | Broadcom Lim... | 82.18 $ | 1000 | IC OPAMP ISOLATION 100KHZ... |
5962-9755701HYC | Broadcom Lim... | 82.39 $ | 1000 | IC OPAMP ISOLATION 100KHZ... |
5962-9755701HYA | Broadcom Lim... | 82.61 $ | 1000 | IC OPAMP ISOLATION 100KHZ... |
5962-9755701HXA | Broadcom Lim... | 83.06 $ | 1000 | IC OPAMP ISOLATION 100KHZ... |
5962-9755701HPA | Broadcom Lim... | 83.22 $ | 1000 | IC OPAMP ISOLATION 100KHZ... |
5962-9755701EPA | Broadcom Lim... | 295.57 $ | 1000 | IC OPAMP ISOLATION |
5962-9755701EPC | Broadcom Lim... | 295.57 $ | 1000 | IC OPAMP ISOLATION |
9755917053 | Laird Techno... | 6.42 $ | 100 | TWT STR SNB PSA CTL |
9755502033 | Laird Techno... | 4.31 $ | 1000 | TWT STR BF PSA CTL |
9755017026 | Laird Techno... | 1.18 $ | 1000 | TWT,STR,SNB,PSA,CTL .30X.... |
9755-CLEAR-1/2"X60YD | 3M | 6.83 $ | 1000 | TAPE ADHSV TRNSFR CLR 1/2... |
9755-CLEAR-1"X60YD | 3M | 13.64 $ | 1000 | TAPE ADHSV TRNSFR CLR 1"X... |
9755-CLEAR-3/4"X60YD | 3M | 11.34 $ | 1000 | TAPE ADHSV TRNSFR CLR 3/4... |
GK NICU PTAFG PU V0 DSH
NOSG,STR,SNB,PSA
CLO,STR,ZNY,DLN
GK NICU NRSG PU V0 SQ
MILCONNECTOR,ECE050 1.50X1.75X1.
GK SNCU NRS PU V0 JSH