98424-F52-12LF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Rectangular Connectors - Headers, Male Pins are electrical components that provide connectivity and are used in a variety of applications. While all electrical components are based on the same principles, the specific applications and working principles of a Rectangular Connectors - Headers, Male Pins are different from each other depending on the design and intended use. In this article, we will look at the 98424-F52-12LF application field and working principle in detail.

The 98424-F52-12LF is a rectangular, SMT header with 2.54 mm pitch, and has twelve straight male pins. It has a 4.5-mm high hous- ing and an 8.4-mm rear mount. It is designed for use in high-density PCBs where space-saving is important while still maintaining connectivity. The 98424-F52-12LF is a mobile home and industrial device, and is perfect for low-level interconnect applications such as single board computers, mobile phones, and tablets, as well as rugged environments such as industrial control systems, automotive, and consumer goods.

The 98424-F52-12LF has a high-temperature nylon housing and a UL94V-0 rated polyester insulator as two main components. This ensures the housing is strong and highly resistant to wear and tear. It also has a nickel-plated steel holder and a black oxide-plated brass contact as two secondary components. The nickel-plated steel holder is conductive and ensures that the connector is held securely. The black oxide-plated brass contact is non-conductive which prevents electrical shorts and keeps electrical signals flowing smoothly. It also prevents corrosion and helps extend the life of the connector.

The 98424-F52-12LF can be connected to a circuit board using either a soldering or a crimping technique. Before soldering any of the contacts, the holes of the circuit board should be tinned using a flux solution. This helps the solder to stick to the copper pads of the board and also protects the board from corrosion. The pins are then inserted into the copper pads and the solder is applied to the pins. After the pins have been soldered securely, the board is insulated with an electrical tape or a shrink-wrap solution. If crimping is preferred, the specially designed contacts are inserted into the board’s holes and are crimped using pliers. The insulation sleeve is then slid over the entire connector.

The 98424-F52-12LF is designed for easy installation and removal. The pins can be easily inserted and extracted by hand or with a blunt object such as a screwdriver or a pin. Its design also allows it to be mounted in high-density PCBs for enhanced space-saving. As the connector is constructed with high-temperature nylon housing, it is also highly resistant to wear and tear, ensuring its longevity.

In conclusion, the 98424-F52-12LF is a rect- angular connector with twelve straight male pins. It has a high-temperature nylon housing and a UL94V-0 rated polyester insulator as two main components, and a nickel-plated steel holder and a black oxide-plated brass con- tact as two secondary components. The 98424-F52-12LF is efficient for low-level interconnect applications in mobile homes and industrial settings, and is designed for easy installation and removal. Its design also allows it to be mounted in high-density PCBs for enhanced space-saving.

The specific data is subject to PDF, and the above content is for reference