999403

Mounting Type:	Through Hole
Screw Thread:	M2.5
Torque - Screw:	0.4-0.5 Nm (3.5-4.4 Lb-In)
Screw Material - Plating:	--
Clamp Material - Plating:	--
Contact Material - Plating:	Copper Alloy - Tin Plated
Housing Material:	Polyamide (PA66), Nylon 6/6
Operating Temperature:	-20°C ~ 100°C
Color:	Black
Features:	Interlocking (Side)
Wire Termination:	Screw - Clamping Yoke, Tension Sleeve
Series:	Omnimate LM
Wire Gauge:	12-24 AWG
Voltage:	300V
Current:	10A
Mating Orientation:	Horizontal with Board
Pitch:	0.200" (5.08mm)
Positions Per Level:	15
Number of Levels:	1
Part Status:	Active
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Terminal blocks are electrical components which bring together an electrical circuit and allow a user to make an electrical connection between two points without executing a permanent connection. This is usually done by providing the user with a screw head or some other means to attach the wire to the terminal block, allowing for a safe connection that can be easily unplugged as needed. The most common type of terminal blocks are those which are designed to connect wires to board level electronics components and are often referred to as “Wire to Board” terminal blocks.The 999403 terminal block is an example of a Wire to Board style terminal block. This type of terminal block is designed to make an electrical connection between two points with the smallest possible package and the lowest possible cost. It is a sturdy and durable block which is able to withstand the forces of vibration and flexing, allowing for the components to remain securely attached without any degradation over time.The 999403 terminal block consists of two clamping parts which are connected by a screw thread. The inner clamps have sharp teeth which allow for a stronger connection than traditional clamps. These teeth dig into the wire’s insulation and create a secure connection point. The outer clamps are indexed and color coded to indicate the size of the wire being used. This allows for easy identification of the wire size which is important for ensuring proper connection and avoiding potential damage to the wire or component.Once the wire is clamped in place, the terminal block is then screwed into place. This creates the secure, vibration-resistant electrical connection that is necessary in order for the components to function properly. The screws used on the 999403 are typically coated with a corrosion-resistant coating in order to provide the highest possible level of protection against the elements.The 999403 terminal block is available in several sizes and shapes, allowing for a wide range of applications. It is most commonly used in applications where space is at a premium, such as in smaller electronic devices. It is also commonly used in the automotive industry, where it is used to create connections between various components of the vehicle.In summary, the 999403 terminal block is a Wire to Board style terminal block which is designed to make electrical connections between two points with the least amount of space and cost. It consists of two clamping parts connected by a screw thread and contains sharp teeth which allow for a stronger connection than traditional clamps. It is corrosion-resistant and has a wide range of applications, from automotive to smaller electronics devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description