9H03200413

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals are solid substances that exist naturally in the form of a three-dimensional lattice or crystal structure. They are composed of one or more elements or compounds and demonstrate certain physical, chemical, and electrical properties. As such, crystals have many uses, including the application of 9H03200413.9H03200413 is a type of crystal that can be used for various applications, such as frequency tuning, frequency control, and filtering. The type of crystal and its specific application depend on the frequency range and its tolerances. This type of crystal has a wide range of frequency band applications, from UHF to S-band, and is very stable in performance.In terms of frequency control and tuning, 9H03200413 crystals have the ability to maintain a constant frequency when an external control voltage is applied. This makes them useful for a variety of different applications, including radio communications, satellite navigation, and more. The crystal can also be used as a filtering medium to reject or direct different types of frequencies, depending on the specific application concerned.In terms of working principle, the 9H03200413 crystal is composed of four layers of crystals. The first two layers consist of two parallel perpendicular layers of high and low reverse voltage transistors. The two layers are connected by an anode that serves as a voltage reference. The third layer consists of two series-connected diodes, which help to form a high-pass filter. The fourth layer is a parallel combination of two capacitors, which are responsible for providing an impedance matching with the external environment. When an external control voltage is applied, it alters the two layers of reverse voltage transistors and allows for the alteration of the frequency of the crystal. The two layers of parallel connected transistors form a voltage-controlled oscillator that follows the control voltage. This is then used to tune the crystal to the desired frequency. In terms of filtering, a higher external control voltage can be used to reject signals above the cut-off frequency while a lower voltage can be used to direct signals at and below the cut-off frequency.In short, 9H03200413 crystals are used for frequency tuning, frequency control, and filtering, and consist of four layers of crystals which contain two series-connected diodes and two parallel capacitors. When an external control voltage is applied, the two layers of reverse voltage transistors are altered to adjust the frequency of the crystal. This can then be used to filter signals at various frequencies, either rejecting or directing them, depending on the application concerned.

The specific data is subject to PDF, and the above content is for reference