Allicdata Part #: | A15N50X4-ND |
Manufacturer Part#: |
A15N50X4 |
Price: | $ 0.79 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | CHIP TERMINATION THICK FILM 2% |
More Detail: | RF Attenuator 0Hz ~ 4.5GHz 50 Ohms 15W |
DataSheet: | A15N50X4 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.71663 |
Series: | -- |
Part Status: | Active |
Attenuation Value: | -- |
Frequency Range: | 0Hz ~ 4.5GHz |
Power (Watts): | 15W |
Impedance: | 50 Ohms |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
Attenuators are devices which reduce the power of a signal, and the A15N50X4 is no exception. This device is an attenuator designed for installation in high power transmission lines, such as those used in transmission towers, cable television systems, and radio towers.
The A15N50X4 attenuator is composed of a series of elements known as resistive cassettes, which comprise of a series of metallic panels. These panels are placed in a vertical position, and are connected in series by a string of insulating material. Each panel is designed to absorb a specific amount of signal power, and when the power exceeds the rated capacity of the panel, the excess amount is dissipated as heat.
The A15N50X4 features a unique design which permits direct placement of the resistive cassette elements along the length of the transmission line without disrupting service. This design is based on a combination of electrical insulation and conductive plates, which reduce the power of the signal, but still maintain the transmission line\'s overall system performance.
The working principle of the A15N50X4 is fairly straightforward. The element attenuates a signal by absorbing energy from it before it is sent up the transmission line. This is accomplished by a series of highly conductive plates which are placed in a vertical position along the length of the transmission line. These plates are connected in series and absorb the signal power before it reaches its destination. Once the energy has been absorbed, the signal power is dramatically reduced.
In addition to the attenuator plates, the A15N50X4 also features an auxiliary circuit which provides a constant voltage level for the line, regardless of changes in the signal power. This allows for a reliable and stable transmission system, even in the face of electrical disturbances. The A15N50X4 also includes a built-in surge protection circuit which limits the amount of energy that can flow across the line, which further protects the overall system.
The A15N50X4 is a great choice for applications such as high power transmission lines, cable television systems, and radio towers. Its ability to provide stable, reliable transmission, even in the face of power fluctuations, makes it an ideal choice for those looking for an attenuation solution in these applications.
The specific data is subject to PDF, and the above content is for reference
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...