Allicdata Part #: | A16A50X4-ND |
Manufacturer Part#: |
A16A50X4 |
Price: | $ 0.79 |
Product Category: | RF/IF and RFID |
Manufacturer: | |
Short Description: | CHIP TERMINATION THICK FILM 2% |
More Detail: | RF Attenuator 0Hz ~ 4GHz 50 Ohms 16W |
DataSheet: | A16A50X4 Datasheet/PDF |
Quantity: | 1000 |
1000 +: | $ 0.71663 |
Series: | -- |
Part Status: | Active |
Attenuation Value: | -- |
Frequency Range: | 0Hz ~ 4GHz |
Power (Watts): | 16W |
Impedance: | 50 Ohms |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators
An A16A50X4 attenuator is a device used to reduce the amplitude of a signal before it reaches an amplifier. It works by attenuating frequencies, usually between 50 Hz and 4 KHz.
The A16A50X4 attenuator is a type of voltage-variable attenuator, meaning that its attenuation can be adjusted by a voltage. The adjustment is accomplished by creating an electric field between two thin dielectric layers and controlling the amount of energy released as the frequency changes. This electric field is created by applying a voltage between two plates, which usually range from 1-150 Volts. By varying the voltage on the plates from 1-150V, the amount of attenuation can be adjusted in a linear fashion.
An A16A50X4 attenuator can be used in a variety of applications, such as audio and video signal processing, telecommunication networks, consumer electronics, instrumentation and more. The device is designed for frequencies up to 4 KHz, so it can be used in applications where the frequencies are lower than that. It can also be used in applications such as radio frequency, microwave and antenna systems.
The main application of an A16A50X4 attenuator is to reduce the output from an amplifier. This is useful for controlling the amount of power that is output from an amplifier, which can prevent the amplifier from being overloaded. It can also be used to change the sound quality of an audio signal by reducing the amount of distortion. In addition, an A16A50X4 attenuator can be used to reduce the effects of signal reflections caused by long cables or amplifiers.
It\'s important to note that an A16A50X4 attenuator is only effective up to 4 KHz, so it\'s not appropriate for use in applications where the frequencies are higher than this. It\'s also not suitable for use in extremely low frequencies, as the device cannot be adjusted to provide the necessary level of attenuation.
In summary, the A16A50X4 attenuator is a device designed to reduce the amplitude of a signal before it reaches an amplifier. It works by attenuating frequencies, usually between 50 Hz and 4 KHz, using an electric field between two dielectric layers. It can be used in a variety of applications, such as audio and video signal processing and instrumentation. It\'s important to note, however, that the device is only effective up to 4 KHz and is not suitable for use in extremely low frequencies.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
XS1-A16A-128-FB217-C8 | XMOS | 14.73 $ | 1000 | IC MCU 32BIT 128KB SRAM 2... |
XS1-A16A-128-FB217-I8 | XMOS | 18.42 $ | 1000 | IC MCU 32BIT 128KB SRAM 2... |
XS1-A16A-128-FB217-I10 | XMOS | 21.18 $ | 1000 | IC MCU 32BIT 128KB SRAM 2... |
SI52138-A16AGM | Silicon Labs | -- | 490 | IC PCIE CLOCK GEN 48QFN |
SI52138-A16AGMR | Silicon Labs | -- | 2500 | IC PCIE CLOCK GEN 48QFN |
OV14810-A16A | OmniVision T... | 0.0 $ | 1000 | IC IMAGE SENSOR 14MP 160-... |
A16A50X4 | 0.79 $ | 1000 | CHIP TERMINATION THICK FI... | |
OV14825-A16A | OmniVision T... | 15.78 $ | 317 | SENSOR IMAGECMOS with Pro... |
XS1-A16A-128-FB217-C10 | XMOS | 19.94 $ | 69 | IC MCU 32BIT 128KB SRAM 2... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...