A3KKB-2606G

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

A3KKB-2606G is a type of rectangular cable assembly. It belongs to a group of cables in which the insulation is cut from a continuous length of insulation material, usually extruded polyamide or cross-linked polyethylene. A3KKB-2606G is most commonly used for power and signal transmission in industrial factory environments and is suitable for both the 5A and 10A applications.

The dimensions of the assembly are 0.160 x 0.25 inches with a standard AWG thickness of 26. The insulation material is cut and flattened into three sections which are then laid in series along the length of the cable. This makes the connections between the electrical conductors much easier and more reliable. The three layers are then held together with side clamps and insulated with an adhesive.

The A3KKB-2606G assembly is constructed from three basic components: a base body, a banding connector, and a hood. The base body is made of extruded polyamide or cross-linked polyethylene material. This provides a rigid support structure for the connector assembly and prevents the physical damage that can be experienced during a power failure or other electrical fault.

The banding connector is made of high quality, non-magnetic material and is designed to hold the cabling together. The design also helps to reduce the risk of making electric contact with the cabling and increase the longevity of the A3KKB-2606G.

The hood is designed to provide protection from dust, moisture, and other contaminants, as well as providing electrical and EMI shielding in the presence of accidental contact with electrical conductors. The hood is made from extruded polyamide or cross-linked polyethylene with the same thickness as the base body.

The proper installation of the A3KKB-2606G assembly is critical to ensure the operation and safety of the system. The installers must first ensure that there are no hazardous areas or line of sight to other equipment in the vicinity of the assembly. Once this is verified, they must install the base body, the banding connector, the hood, and any additional accessories that may be required.

The proper use and maintenance of the A3KKB-2606G assembly is essential to ensure the long-term operation of the system. The assembly should be checked at regular intervals to ensure that the connections remain tight and that the insulation is not worn or damaged. The assembly should also be visually inspected for any signs of corrosion or electrical shorts.

The A3KKB-2606G rectangular cable assembly is ideal for most industrial factory environments and is a well-designed and reliable solution for power and signal transmission. It is suitable for both the 5A and 10A applications and is also ideal for use in applications where size and weight are of significant concern. It is important to remember that proper installation, use, and maintenance are essential to ensure the long-term operation of the assembly.

The specific data is subject to PDF, and the above content is for reference