Allicdata Part #: | A410XE-ND |
Manufacturer Part#: |
A410 |
Price: | $ 0.00 |
Product Category: | Development Boards, Kits, Programmers |
Manufacturer: | Xeltek |
Short Description: | ADAPTER PROGRAMMER 32-TSOP |
More Detail: | Xeltek Programmers - Socket Module - TSOP |
DataSheet: | A410 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Part Status: | Obsolete |
Module/Board Type: | Socket Module - TSOP |
For Use With/Related Products: | Xeltek Programmers |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
A410 is a programming adapter that is mainly used for debugging on-chip embedded applications and protocol communication applications. It mainly supports 3D, USB 3.0, Serial ATA, and SATA III standards. It is a professional programming adapter for devices that require JTAG signals.
The core of A410 programming adapters is the physical layer chip, which integrates the PHY, PMA and IC into a single chip. This chip operates at speeds of up to 5 Gbps, and uses an M-PCI-E interface to provide four lanes of data transfer at 5 Gbps per lane. It also supports 3D, serial ATA, SATA III, USB 3.0, and other high-speed data communication protocols. With A410, users can easily debug embedded applications, protocol communication applications, and other high-speed data transfer applications.
A410 programming adapters have several key features, including support for 3D, Serial ATA, USB 3.0, and SATA III standards, and integration of PHY, PMA and IC. This allows for high-speed data transfers and debugging at up to 5 Gbps. Additionally, the M-PCI-E interface provides four lanes of data transfer at 5 Gbps, enabling users to debug applications quickly and accurately. Finally, the A410 adapter provides power management capabilities, allowing users to manage power consumption and prevent overheating.
The working principle of the A410 programming adapter is simple. The adapter is connected to a computer or laptop via the M-PCI-E interface, and the device to be debugged is connected to the other end of the adapter. The debug process is started by selecting the appropriate debug mode (3D, Serial ATA, USB 3.0, SATA III, etc.) and then sending the appropriate debug commands to the adapter. The commands are then sent to the device to be debugged via the M-PCI-E interface. The device then responds with commands of its own, which is then received by the programming adapter. The adapter then sends back the appropriate debug commands, which are then carried out by the device being debugged.
In summary, the A410 programming adapter is a powerful debugging tool for on-chip embedded applications and protocol communication applications. It supports high-speed data transfers and provides power management capabilities to prevent overheating. It utilizes an M-PCI-E interface to transmit debug commands, and can be used with 3D, Serial ATA, USB 3.0, and SATA III protocols. The working principle of the A410 programming adapter is simple and straightforward, allowing users to debug their applications quickly and accurately.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
10125756-A41010LF | Amphenol FCI | 2.07 $ | 1000 | PCIE GEN3 STRADDLEMOUNT |
A410 | Xeltek | 0.0 $ | 1000 | ADAPTER PROGRAMMER 32-TSO... |
U92-A410-1001-30 | Amphenol Com... | 16.42 $ | 1000 | CONN MINI SAS RCPT W/CAGE... |
ZN-A4105 | Omron Automa... | 1.39 $ | 1 | AIR CLEAN UNITDust Sensor |
ADAPTER INT 80C196 DIP40/PLCC68ChipProg-...
ADAPTER SOCKET 44-QFP TO 40-DIPChipProg-...
ADAPTER FOR PL-MPUAltera Devices MegaCor...
PROG ADAPTER FOR 1800/1810JAltera Device...
88-PIN UFBGA ADAPTERAltera Devices - Soc...
PROG ADAPTER 7K 44 PIN TQFPAltera Device...