Allicdata Part #: | 620-1880-2-ND |
Manufacturer Part#: |
A4964KEVTR-J |
Price: | $ 1.93 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Allegro MicroSystems, LLC |
Short Description: | AUTOMOTIVE SENSORLESS SINUSOIDAL |
More Detail: | Motor Driver SPI 36-QFN (6x6) |
DataSheet: | A4964KEVTR-J Datasheet/PDF |
Quantity: | 1000 |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
1500 +: | $ 1.75033 |
Step Resolution: | -- |
Supplier Device Package: | 36-QFN (6x6) |
Package / Case: | 36-VFQFN Exposed Pad |
Mounting Type: | Surface Mount |
Operating Temperature: | -40°C ~ 150°C (TA) |
Voltage - Load: | -- |
Voltage - Supply: | 5.5 V ~ 50 V |
Current - Output: | -- |
Applications: | Automotive |
Series: | -- |
Interface: | SPI |
Function: | Controller - Commutation, Direction Management |
Motor Type - AC, DC: | Brushless DC (BLDC) |
Motor Type - Stepper: | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The A4964KEVTR-J is a monolithic integrated full-bridge gate driver designed to drive up to two DC brushed motors or stepper motors in a wide variety of applications. It is part of the PMIC - Motor Drivers, Controllers group, and is designed to operate with a minimum of external components. The A4964KEVTR-J works by providing a controlled voltage to an external motor, which drives the motor to change speed, torque and direction. The voltage signal is generated by comparing the desired speed with the actual speed of the motor.
The A4964KEVTR-J includes several features to ensure good performance and enhanced functionality. It includes a minimum latch-up protection to ensure safety and reliability for the device itself, and for the circuits that it is powering. There is also a wide input voltage range, from 3 – 32 V, and a wide temperature range, from -40°C – +150°C. The A4964KEVTR-J also includes an on-chip protection circuit that prevents overcurrent, overvoltage, and thermal protection.
The A4964KEVTR-J features full-bridge dual DC brushless motors with low on resistance outputs, providing high efficiency and low heat dissipation. It also incorporates an optimized mix of integrated gate drivers, with each commander able to source or sink up to 1.5 A. The driver also has the capability to switch current up to 200 A peak, allowing for heavier loads and faster speeds. Finally, the A4964KEVTR-J comes with a wide selection of operational modes, including forward, bidirectional, and reversible PWM.
The A4964KEVTR-J works by sensing the speed of a motor and comparing it to the desired speed. When the speed drops below the desired speed, the A4964KEVTR-J turns on the power to correct the speed, and when the speed exceeds the desired speed, the device turns off the power. This process is controlled by voltage signals provided to the device, and the device responds to changes in these signals by adjusting the power output. The A4964KEVTR-J can be programmed to change the speed and direction of the motor, as well as to adjust the torque and current. The device also allows for a soft start, ramp up, and ramp down feature, providing a smoother start and stop of the motor.
The A4964KEVTR-J is also designed with safety and reliability in mind. It includes a variety of protection features, including overcurrent, overvoltage, and thermal protection. It also includes undervoltage locking and maximum duty cycle limitation, ensuring that the motor is not driven too hard, which could lead to damage or malfunctions. Additionally, the device incorporates an overtemperature protection circuit, which limits the temperature of the motor to safe levels.
The A4964KEVTR-J can be used in a variety of applications, such as industrial, automotive, and robotics. It is suitable for driving a variety of motors, including DC brushed, stepper motors, and brushless DC motors. The device also has wide applications in a variety of devices, from VCRs and DVD players to power steering systems, and more. The A4964KEVTR-J is a great choice for anyone looking for an efficient, reliable, and cost-effective motor driver.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
943-SP-370808SM2-A496 | Stewart Conn... | 0.61 $ | 1000 | CONN MOD PLUG 8P8C SHIELD... |
A4963GLPTR-T | Allegro Micr... | 0.98 $ | 4000 | IC MOTOR CONTROLLERMotor ... |
A4964KEVTR-J | Allegro Micr... | 1.93 $ | 1000 | AUTOMOTIVE SENSORLESS SIN... |
A4964KJPTR-T | Allegro Micr... | 2.06 $ | 1000 | AUTOMOTIVE SENSORLESS SIN... |
A4960KJPTR-T | Allegro Micr... | 2.7 $ | 1000 | IC MOTOR CONTROLLER SPI 3... |
A4960KJPTR-A-T | Allegro Micr... | 2.7 $ | 1000 | IC MOTOR CONTROLLER SPI 3... |
A4962KLPTR-T | Allegro Micr... | 1.34 $ | 1000 | IC MOTOR CONTROLLERMotor ... |
A4960SJPTR-T | Allegro Micr... | 1.8 $ | 1000 | IC FAN DRIVER BLDC QFPMot... |
IC Controllers & Drivers DC 5.5V 16H...
IC MOTOR CONTROLLER 8SOICMotor Driver Bi...
SPM8 4AMotor Driver
IC MOTOR DRIVER PAR 36POWERSOMotor Drive...
IC MOTOR CONTROLLER I2C 28TQFNMotor Driv...
IC MOTOR DRIVER SPI 30HSOPMotor Driver P...