A6833SEPTR-T Integrated Circuits (ICs) |
|
Allicdata Part #: | 620-1311-2-ND |
Manufacturer Part#: |
A6833SEPTR-T |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Allegro MicroSystems, LLC |
Short Description: | IC SINK DVR 32BIT LATCH 44PLCC |
More Detail: | N/A |
DataSheet: | A6833SEPTR-T Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | 3 V ~ 5.5 V |
Base Part Number: | A6833 |
Supplier Device Package: | 44-PLCC (16.59x16.59) |
Package / Case: | 44-LCC (J-Lead) |
Operating Temperature: | -20°C ~ 85°C (TA) |
Fault Protection: | -- |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | -- |
Current - Output (Max): | 125mA |
Series: | -- |
Voltage - Load: | 30V (Max) |
Interface: | Strobe, Serial |
Output Type: | Bipolar |
Output Configuration: | Low Side |
Ratio - Input:Output: | 1:32 |
Number of Outputs: | 32 |
Switch Type: | Latched Driver |
Part Status: | Obsolete |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The A6833SEPTR-T is an analog integrated circuit designed for applications such as digital power supply management, load shedding, and load/source switchover in digital power systems. It is designed to provide an interface between the system controller and multiple power sources and associated loads.
The A6833SEPTR-T is classified as a PMIC (Power Management Integrated Circuit) since it is a single-chip solution for various power related functions. It includes a variety of loading driving, power distribution switching, and logic control circuits.
Power distribution switches are used to identify and switch from one power source to another, such as from an AC source to a DC source or vice versa. These switches allow power to be selectively enabled or disabled in order to control the flow of current through the system. The A6833SEPTR-T contains two general-purpose power switches, capable of switching up to two independent sources to two separate loads.
Load drivers are used to control the output current to a variety of loads, such as motors, LEDs, and other components. The A6833SEPTR-T contains four general-purpose load driving circuits to adjust the output current from 0 to 20mA or up to 100mA.
The A6833SEPTR-T also contains four logic control circuits, which can be used to configure a variety of digital power supply sequences. These logic control circuits can enable/disable power switches and adjust the current provided by the load drivers.
The A6833SEPTR-T provides a wide range of features and benefits that make it suitable for a variety of applications. It provides an interface between the system controller and multiple power sources and associated loads, allowing for more efficient control and greater flexibility. Additionally, the A6833SEPTR-T contains integrated power switches, load drivers, and logic control circuits, making it a one-stop solution for all of your power management needs.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
A6832SEPTR-T | Allegro Micr... | 0.0 $ | 1000 | IC SINK DVR 32BIT LATCH 4... |
A6833SEPTR-T | Allegro Micr... | 0.0 $ | 1000 | IC SINK DVR 32BIT LATCH 4... |
A6832EEP-T | Allegro Micr... | -- | 1000 | IC SINK DRIVER 32BIT LATC... |
A6832EEPTR-T | Allegro Micr... | 0.0 $ | 1000 | IC SINK DRIVER 32BIT LATC... |
A6832SEP-T | Allegro Micr... | 0.0 $ | 1000 | IC SINK DRIVER 32BIT LATC... |
A6833SEP-T | Allegro Micr... | 0.0 $ | 1000 | IC SINK DRIVER 32BIT LATC... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC