Allicdata Part #: | 863-1234-2-ND |
Manufacturer Part#: |
AA210-25LF |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Skyworks Solutions Inc. |
Short Description: | ATTENUATOR DGTL GAAS 4BIT 16SOIC |
More Detail: | RF Attenuator 15dB ±3% 300kHz ~ 2GHz 50 Ohms 16-S... |
DataSheet: | AA210-25LF Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Obsolete |
Attenuation Value: | 15dB |
Frequency Range: | 300kHz ~ 2GHz |
Power (Watts): | -- |
Impedance: | 50 Ohms |
Package / Case: | 16-SOIC (0.154", 3.90mm Width) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Attenuators are devices used to reduce the amplitude of a signal without changing frequencies. It is a critical component of electronic systems, with many applications. The AA210-25LF is a specific type of attenuator that can be used for a variety of purposes.
Applications of the AA210-25LF
One of the most common applications for the AA210-25LF is in audio equipment. The attenuator allows for precise control over the output of an audio system. By decreasing the amplitude of some signals and increasing the amplitude of others, it is possible to achieve a desired balance between the highs and lows. The AA210-25LF is also commonly used in radio and television broadcasts, as well as in personal computing systems and other electronic devices.
Another application for the AA210-25LF is in medical equipment. This type of attenuator can be used to ensure that the correct voltage is supplied to sensitive medical instruments, such as pacemakers or blood pressure monitors. It can also be used to control the level of power supplied to certain devices, such as MRI scanners or X-ray machines.
Finally, the AA210-25LF can be used in industrial settings. This type of attenuator can be used to control the voltage supplied to motors, so that they start up gradually and do not cause sudden power surges. It can also be used to help regulate temperature in industrial processes, such as in heating and cooling systems.
How Does the AA210-25LF Work?
The AA210-25LF attenuator is a type of resistor network that uses two identical resistors in parallel with one another. When an alternating current (AC) signal is applied to the network, the current is “split” between the two resistors. This causes the voltage of the signal to decrease, thus producing an attenuated signal. The amount by which the signal is attenuated is determined by the value of the two resistors. The two resistors can be adjusted independently, allowing the user to fine-tune the amount of attenuation achieved by the network.
In addition to providing voltage attenuation, the AA210-25LF also has a very low insertion loss. This means that very little of the signal’s power is lost when it passes through the network. This helps to ensure that the output of the network is as close as possible to the original source signal.
Conclusion
The AA210-25LF is a valuable component that can be used for a variety of applications. It can be used to reduce the amplitude of signals in audio equipment, radio and television broadcasts, medical equipment, and industrial settings. It is also known for its low insertion loss, which ensures that very little of the signal’s power is lost during attenuation. The combination of these features makes the AA210-25LF an invaluable tool in a variety of applications.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
A2S155-AA21-01 | ebm-papst In... | 125.16 $ | 1000 | AC AXIAL FAN |
AA210-25LF | Skyworks Sol... | -- | 1000 | ATTENUATOR DGTL GAAS 4BIT... |
RF ATTENUATOR 1DB-31DB 24VFQFNRF Attenua...
RF ATTENUATOR 1DB-60DB 50OHM TNCRF Atten...
RF ATTENUATOR 1DB SMA MODULERF Attenuato...
RF ATTENUATOR 2DB 50OHM 1206RF Attenuato...
RF ATTENUATOR 6DB 50OHM SMARF Attenuator...
RF ATTENUATOR 7DB SMA MODULERF Attenuato...