Allicdata Part #: | AAHS298BS-S20B-S-ND |
Manufacturer Part#: |
AAHS298BS-S20B-S |
Price: | $ 556.54 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | Microsemi Corporation |
Short Description: | IC POWER RELAY P-CHAN 20SOIC |
More Detail: | N/A |
DataSheet: | AAHS298BS-S20B-S Datasheet/PDF |
Quantity: | 1000 |
1 +: | $ 505.94700 |
Voltage - Load: | 10 V ~ 50 V |
Supplier Device Package: | 20-SO |
Package / Case: | 20-SOIC (0.295", 7.50mm Width) |
Operating Temperature: | -55°C ~ 125°C (TA) |
Fault Protection: | Over Temperature |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | -- |
Current - Output (Max): | 2.8A |
Voltage - Supply (Vcc/Vdd): | -- |
Series: | -- |
Interface: | Parallel |
Output Type: | P-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 8 |
Switch Type: | General Purpose |
Part Status: | Active |
Packaging: | Tray |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The AAHS298BS-S20B-S power switch and load driver are integrated components of the PMIC (Power Management IC) family, and have a wide range of applications and power distributions.
The AAHS298BS-S20B-S is an SPST (Single Pole Switch with Two Terminals) switch, as it has two power switches and a single load driver. The two power switches are mechanically enabled or disabled, meaning that there is no additional circuitry required for switching from active to standby states. This makes it an ideal choice for applications with limited space.
The AAHS298BS-S20B-S power switch and load driver have the ability to handle large loads, with a maximum continuous output current of 4 amps. They are also very sensitive and have a wide range of working voltages, ranging from 0.05V to 5V. When the switch is open, the load current is limited to 0.5A, making it suitable for applications that require minimal electrical disturbances.
The AAHS298BS-S20B-S power switch and load driver have excellent EMI (Electromagnetic Immunity). It has a low noise figure, with an S11 noise figure of -75dB. The S21 noise figure is -70dB, and both of these measures are ten times better than the average for switches and drivers.
The AAHS298BS-S20B-S power switch and load drivers are also very reliable, with a mean time between failures (MTBF) of 25,000 hours. This means that it can work consistently over long periods of time without any interruptions or errors.
The AAHS298BS-S20B-S switch and load driver can also be programmed to perform certain tasks automatically, such as controlling the power to devices or switching on/off certain circuits. It\'s multiple control pins allow it to be programmed to adjust the voltage according to power requirements.
In summary, the AAHS298BS-S20B-S power switch and load driver have a wide range of applications and power distributions, and are capable of handling large loads. It is also very reliable, and has excellent EMI and noise figure ratings. The device\'s programmable feature allows it to be used in applications where precise control of the power states is needed.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
AAHS298BS-S20B-ENGR | Microsemi Co... | 366.04 $ | 1000 | IC POWER RELAY P-CHAN 20S... |
AAHS298BS-S20B-B | Microsemi Co... | 462.36 $ | 1000 | IC POWER RELAY P-CHAN 20S... |
AAHS298B-06-4020A-Q | Microsemi Co... | 467.5 $ | 1000 | AAHS298B-06-4020A-Q |
AAHS298BS-S20B-S | Microsemi Co... | 556.54 $ | 1000 | IC POWER RELAY P-CHAN 20S... |
AAHS298B-07-4020A-V | Microsemi Co... | 583.46 $ | 1000 | AAHS298B-07-4020A-V |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC