ABS06W-32.768KHZ-J-1-T

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Crystals, including quartz crystals, are commonly encountered in a variety of electrical and electronic components. They are used to generate electrical oscillations and to accurately control the frequency of a device, thereby enabling it to operate at known, fixed frequencies. The ABS06W-32.768KHZ-J-1-T is a type of crystal that is often used as an oscillator, typically in consumer electronics products such as watches and calculators. In this article, we\'ll explain what an ABS06W-32.768KHZ-J-1-T is, its application fields, and its working principle.

What Is an ABS06W-32.768KHZ-J-1-T

An ABS06W-32.768KHZ-J-1-T is a type of crystal oscillator, which is used to convert a electrical signal into a fixed frequency signal. It consists of an ABS06W-32.768KHZ-J-1-T crystal, a load capacitor, an oscillator IC and an internal IC. The quartz crystal acts as an active element that can convert mechanical vibrations into electrical signals and vice versa. This crystal has a nominal center frequency of 32.768KHz.

Application Field

The ABS06W-32.768KHZ-J-1-T is typically used in consumer electronics products such as watches and calculators. It is also used in applications where low current draw and accurate timing are required, such as alarm clocks, vehicles alarms and industrial control systems. In addition, it is also used in radio communication devices such as GSM handsets, radio control systems and radio frequency measurement instruments.

Working Principle

The working principle of the ABS06W-32.768KHZ-J-1-T is based on the piezoelectric property of quartz. The quartz crystal is composed of a piece of quartz which has two electrodes on the top and bottom and is surrounded by a sealed metallic container. An electrical signal is applied to the electrodes at one end and the quartz crystal will begin to vibrate due to the piezoelectric effect, causing the electrical signal to oscillate at the crystal\'s resonant frequency (32.768KHz in this case) which is determined by the size and shape of the crystal. The oscillating electrical signal is then sent to the oscillator IC. The oscillator IC amplifies the signal and passes it through a load capacitor in order to stabilize the oscillation frequency. The signal is then passed on to an internal IC, which is used to provide additional support for the final application.

In conclusion, the ABS06W-32.768KHZ-J-1-T is a quartz crystal oscillator used in various applications such as watches, calculators, alarm clocks and more. Its working principle is based on the piezoelectric effect of quartz, which causes the crystal to vibrate at a specific frequency when an electrical signal is applied to its electrodes. This frequency is then amplified and passed through a load capacitor in order to maintain a consistent output frequency.

The specific data is subject to PDF, and the above content is for reference