Allicdata Part #: | ABS4HREG-ND |
Manufacturer Part#: |
ABS4HREG |
Price: | $ 0.07 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | Taiwan Semiconductor Corporation |
Short Description: | BRIDGE RECT 1P 400V 800MA ABS |
More Detail: | Bridge Rectifier Single Phase Standard 400V Surfac... |
DataSheet: | ABS4HREG Datasheet/PDF |
Quantity: | 1000 |
10000 +: | $ 0.06029 |
Series: | Automotive, AEC-Q101 |
Packaging: | Tape & Reel (TR) |
Part Status: | Active |
Diode Type: | Single Phase |
Technology: | Standard |
Voltage - Peak Reverse (Max): | 400V |
Current - Average Rectified (Io): | 800mA |
Voltage - Forward (Vf) (Max) @ If: | 950mV @ 400mA |
Current - Reverse Leakage @ Vr: | 10µA @ 400V |
Operating Temperature: | -55°C ~ 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | 4-SMD, Gull Wing |
Supplier Device Package: | ABS |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Diodes - Bridge Rectifiers
A bridge rectifier is an electronic component that converts AC voltage, commonly from a power source such as a wall outlet, into DC voltage. It is widely used in many applications, from power supplies to audio amplifiers, from power inverters to electric vehicles. Bridge rectifiers are constructed from four P/N series connected diodes and a suitable heat sink to dissipate the heat from the diodes. Although the bridge rectifier circuit appears to be simple, it can be used to convert AC voltage into DC in many different ways.
One of the most popular types of bridge rectifiers is the ABS4HREG (Alternating Bridge Rectifier). This type of bridge rectifier utilizes two reverse-biased junction diodes in each arm of the bridge and is designed to convert alternating current (AC) voltage into direct current (DC) voltage. It is used where high-capacity, high efficiency DC-to-AC conversions are required, such as in high-power industrial equipment, large electric motors, and automobiles. In addition to its superior electrical performance, the ABS4HREG also offers a low total harmonic distortion and excellent voltage regulation.
The output of the ABS4HREG bridge rectifier is a steady, unidirectional DC voltage waveform, which is usually filtered through a smoothing circuit to reduce noise and ripple. The smoothing circuit can be made up of one or more capacitors, which are connected in series and/or parallel to the output of the rectifier in order to filter out the AC ripple. The amount of ripple present will depend on the type and amount of capacitors used in the filter, as well as the load current. The output DC signal will usually be rectified by an additional rectifying circuit to increase the DC signal level.
The working principle of the ABS4HREG bridge rectifier is fairly simple. When an AC power source is connected to the circuit, the two reverse-biased junction diodes in each arm of the bridge rectify the AC voltage and convert it into DC voltage. The AC impedance of the circuit is low, allowing the whole output waveform to be converted into DC with minimal losses. Due to its low losses and its ability to efficiently convert AC to DC, the ABS4HREG bridge rectifier is an efficient and cost-effective solution for power supplies and other AC-to-DC conversion applications.
In conclusion, the ABS4HREG bridge rectifier is a versatile and reliable type of rectifier that offers low losses and efficient AC-to-DC conversions. It is well-suited for a wide range of applications such as power supplies, audio amplifiers, power inverters, and electric vehicles. The bridge rectifier not only simplifies the circuit design process but also offers superior electrical performance in terms of low harmonic distortion and excellent voltage regulation.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
ABS4616419 | Panasonic El... | 3.75 $ | 1000 | SWITCH SNAP ACT SPDT 100M... |
ABS4516403 | Panasonic El... | 1.86 $ | 1000 | SWITCH SNAP ACTION SPDT 2... |
ABS4513503 | Panasonic El... | 1.95 $ | 1000 | SWITCH SNAP ACTION SPDT 2... |
ABS4512349 | Panasonic El... | 2.19 $ | 1000 | SWITCH SNAP ACTION SPDT 1... |
ABS4514349 | Panasonic El... | 2.19 $ | 1000 | SWITCH SNAP ACTION SPDT 1... |
ABS4516549 | Panasonic El... | 3.51 $ | 200 | SWITCH SNAP ACTION SPDT 1... |
ABS4TR | SMC Diode So... | 0.03 $ | 1000 | BRIDGE RECT 1PHASE 400V 1... |
ABS4UTR | SMC Diode So... | 0.03 $ | 1000 | BRIDGE RECT 1PHASE 400V 1... |
ABS4 RGG | Taiwan Semic... | 0.07 $ | 1000 | BRIDGE RECT 1P 400V 800MA... |
ABS4 REG | Taiwan Semic... | 0.06 $ | 1000 | BRIDGE RECT 1P 400V 800MA... |
ABS4HRGG | Taiwan Semic... | 0.07 $ | 1000 | BRIDGE RECT 1P 400V 800MA... |
ABS4HREG | Taiwan Semic... | 0.07 $ | 1000 | BRIDGE RECT 1P 400V 800MA... |
BRIDGE RECT 1PHASE 1KV 2A KBPMBridge Rec...
IC BRIDGE RECT 1.5A 100V WOMBridge Recti...
IC BRIDGE RECT 1.5A 50V WOMBridge Rectif...
RECT BRIDGE 1200V 90A MTKBridge Rectifie...
RECT BRIDGE 1A 240VBridge Rectifier Sing...
BRIDGE RECT 3 PHASE 800V 58ABridge Recti...