ABSM2-27.000MHZ-4-T

Series:	ABSM2
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Type:	MHz Crystal
Frequency:	27MHz
Frequency Stability:	±50ppm
Frequency Tolerance:	±30ppm
Load Capacitance:	18pF
ESR (Equivalent Series Resistance):	50 Ohms
Operating Mode:	Fundamental
Operating Temperature:	-10°C ~ 60°C
Ratings:	--
Mounting Type:	Surface Mount
Package / Case:	4-SOJ, 9.40mm pitch
Size / Dimension:	0.492" L x 0.181" W (12.50mm x 4.60mm)
Height - Seated (Max):	0.146" (3.70mm)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to Crystals and ABSM2-27.000MHZ-4-T

Crystals are components of electronics and radio frequency (RF) circuits and are essential for the proper functioning of a wide range of electronic equipment. Crystals provide stability and oscillation for timing circuits, or for controlling the frequency of transmission and reception of RF signals. Most crystals have a resonance frequency, or a frequency at which they respond favorably. The resonance frequency is determined by the load capacitance added to the crystal and to the circuits connected to it. Crystals are typically manufactured areas such as quartz, lithium niobate, or potassium niobate.ABSM2-27.000MHZ-4-T is a high-frequency and high-stability quartz crystal from the Abracon Corporation, a world leader in crystal technology. This crystal is a low-power device that is suitable for use in portable and remote applications. The crystal has a maximum frequency of 27MHz and a maximum stability of 14ppm over the temperature range of -40°C to 85°C. It is capable of providing excellent frequency stability over a wide range of operating conditions. The ABSM2-27.000MHZ-4-T is housed in a small 4-pin surface-mount package and is ideal for applications that require a small form factor and low power consumption.

The Working Principle of ABSM2-27.000MHZ-4-T Crystals

The principle behind the ABSM2-27.000MHZ-4-T crystal is relatively simple. A quartz crystal has a natural resonance frequency. When a voltage is applied to the crystal, it creates vibrations at its natural frequency. These vibrations can be amplified and used as a clock signal to create precise timing pulses. The crystal oscillator is essentially a resonant circuit, consisting of the crystal, two capacitors and two resistors. The capacitors, resistors, and crystal form a parallel resonant circuit and the resonant frequency is determined by the values of the components, as well as the type of crystal.

The Applications of ABSM2-27.000MHZ-4-T Crystals

The ABSM2-27.000MHZ-4-T and similar crystals are used in a variety of electronic applications, including communications systems, computing, telecommunications and automotive electronics. These crystals are typically used as the reference clock for microcontroller or microprocessor based systems. They are also used as timing references for mobile and portable devices and as frequency sources for RF applications. The combination of low-power consumption and high-stability of these crystals makes them ideal for use in handheld, wearable, and other remote devices. These crystals are also widely used in medical and test equipment, where precise timing and frequency stability are required.The ABSM2-27.000MHZ-4-T crystal is also suitable for use in automotive electronics and avionics. Its low-power consumption and high-stability make it an excellent choice for applications such as engine control systems, navigation systems, and other critical automotive subsystems. In addition, these crystals are also suitable for use in radio transmitters and receivers, radio frequency identification (RFID) tags, and high-temperature applications.

Conclusion

In summary, the ABSM2-27.000MHZ-4-T is a high-frequency and high-stability quartz crystal that is used in a wide range of electronic applications. It is a low-power device with a small form factor and excellent frequency stability over a wide range of operating conditions. The crystal is suitable for applications that require precise timing and frequency stability, such as automotive electronics, avionics, medical and test equipment, and mobile and portable devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description