AC01000008200JA100 Resistors

Series:	AC
Packaging:	Tape & Box (TB)
Part Status:	Active
Resistance:	820 Ohms
Tolerance:	±5%
Power (Watts):	1W
Composition:	Wirewound
Features:	Flame Retardant Coating, Pulse Withstanding, Safety
Temperature Coefficient:	100/ +180ppm/°C
Operating Temperature:	-40°C ~ 275°C
Package / Case:	Axial
Supplier Device Package:	Axial
Size / Dimension:	0.169" Dia x 0.433" L (4.30mm x 11.00mm)
Height - Seated (Max):	--
Number of Terminations:	2
Failure Rate:	--

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Through Hole Resistors

Resistors are components that are used in almost all electrical circuits to limit current flow, set operational voltages, split an output signal into two parts and to provide bias to active elements. There are various types of resistors including through hole resistors, surface mount resistors and network resistors. This article focuses on through-hole resistors and their AC01000008200JA100 application field and working principle. Through-hole resistors are the traditional type of resistors that were available prior to the development of surface mount resistors. Also referred to as through-hole style resistors, they feature two leads with metal clamps, which are inserted into the holes on the printed circuit boards. The two leads are then soldered into place. These resistors are typically cylindrical in shape and require a larger amount of space on the printed circuit board than surface mount resistors.The AC01000008200JA100 resistor is a type of through-hole resistor with ceramic composition. It has an insulated coating to prevent any accidental shorts or contact between its terminals. It features an axial leads configuration, meaning that it has a pair of lead wires extending from both sides. The two lead wires are then inserted into the appropriate holes on the printed circuit board. The resistor is used in a broad range of electronic devices and circuit boards.The AC01000008200JA100 resistor featured an ohm rating of 8200 ohms. This is an extremely low resistance value and is ideal for applications such as power supplies, audio amplifiers and radio receivers. In addition, this type of resistor is able to dissipate a much higher amount of power than run of the mill resistors.The working principle of the AC01000008200JA100 resistor is based on Ohm’s law. Ohm’s law states that the current passing through a resistor is directly related to the voltage that is applied across its terminals. When the voltage is applied, a current is induced that is proportional to the voltage. This current flow then generates a certain amount of heat, which is dissipated as a result of the resistor’s thermal design.The thermal design of the AC01000008200JA100 resistor consists of an externally coated ceramic body. This coating acts as an insulator and helps protect the resistor from heat. The body of the resistor is composed of an internal ceramic sleeve and a three-dimensional component, which conducts heat away from the resistor. The ultimate result is that the resistor is able to handle large spike currents that are induced by the applied voltage.The AC01000008200JA100 resistor is capable of withstanding temperatures of up to 125 degrees Celsius. This temperature rating is excellent for most electronic applications and is suitable for low voltage circuits. In addition, the resistor is also able to handle pulses of up to 1 kHz and its low induction makes it ideal for use in radio receivers.In conclusion, the AC01000008200JA100 resistor is a through-hole style resistor with a ceramic composition and it offers a wide range of benefits for various electronic applications. Its small size and low resistance value make it ideal for applications such as power supplies and audio amplifiers. Additionally, its temperature rating and its ability to handle high frequencies and high levels of current make it an excellent choice for many other applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description