ACM2012D-900-2P-T00 Filters

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Common Mode Chokes (CMCs) provide a reliable method to reduce the transmission of common-mode noise on the power cable lines that connect to the equipment. The ACM2012D-900-2P-T00 is a common mode choke designed for power applications with a dual-pair structure and a 2.54 mm grid size.

The ACM2012D-900-2P-T00 operates by taking the difference between the two lines in the pair, thereby reducing the common-mode noise. The choke works by supplying a degree of impedance to the connection, which reduces the amount of power that can be transmitted. This impedance creates a “wall” that prevents noise from being transmitted down the power line. Additionally, the device provides a high level of isolation between the two wires in the pair.

The ACM2012D-900-2P-T00 is well-suited for applications that require a reduction in common-mode noise, such as industrial power distribution systems. The device is designed for AC applications with a frequency range of 50Hz to 100 kHz and a voltage level of 250VAC. It is designed to withstand up to 2000V of induced voltage and can provide up to 50dB of attenuation at 1980Hz for a 10 MΩ load. The ACM2012D-900-2P-T00 is also designed to be shielded, reducing the amount of noise that is emitted and improving performance.

In terms of installation, the ACM2012D-900-2P-T00 is quite easy to use. The device can be mounted directly onto a DIN rail or surface-mounted with a single screw. It also features an optional connection screw and lock nut, which can be used for secure connections. Furthermore, the device is designed with an integrated ground terminal, which improves its noise reduction capabilities.

In conclusion, the ACM2012D-900-2P-T00 is a reliable common mode choke that is well-suited for power applications. It operates by providing a degree of impedance to reduce the power transmitted on the power lines, as well as isolation between the two lines in the pair. The device is designed with a 2.54 mm grid size and can be easily installed on a DIN rail or surface-mounted. It is capable of up to 2000V of induced voltage and provides up to 50dB of attenuation at 1980 Hz for a 10 MΩ load. Furthermore, the device is shielded to reduce noise emission and improve noise reduction capabilities.

The specific data is subject to PDF, and the above content is for reference