ACMD-7606-TR1

Series:	--
Packaging:	Tape & Reel (TR)
Part Status:	Obsolete
Frequency Bands (Low / High):	880MHz ~ 915MHz / 925MHz ~ 960MHz
Low Band Attenuation (min / max dB):	45.00dB / 55.00dB
High Band Attenuation (min / max dB):	44.00dB / 56.00dB
Return Loss (Low Band / High Band):	10dB / 10dB
Mounting Type:	Surface Mount
Package / Case:	8-VQFN Exposed Pad, CSP

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

；

Introduction

RF Diplexers are a type of electronic device which combines or separates components of a radio-frequency signal into two bands. The device uses electromagnetic principles such as inductance and capacitance for the division and combination of signals. The ACMD-7606-TR1 is a type of RF Diplexer designed to combine or separate two signals in the 2450 MHz to 2690 MHz frequency band with insertion loss better than 0.6 dB.

Application Field

The ACMD-7606-TR1 is mainly used in multimode and switchable cellular systems. It provides a low cost and effective solution to expanding capacity of existing sites by reducing the number of antennas used. It is also used for cordless phone systems, TV broadcasting, and other multimedia applications. The ACMD-7606-TR1 is also used for fixed point to point wireless applications. Its performance characteristics are optimized for high linearity and low harmonic distortion.

Working Principle

The ACMD-7606-TR1 is made up of two filters – a high-pass filter and a low-pass filter. The high-pass filter is used to pass signals at frequencies above 2450 MHz. The low-pass filter is used to pass signals at frequencies below 2690 MHz. The two filters are connected together with an inductor-capacitor pair that acts like a diplexer (a device which splits a signal into two channels). The ACMD-7606-TR1 works on the principle of reflection and transmission. When a signal is sent through the diplexer, the high-frequency component of the signal is reflected off the high-pass filter, while the low-frequency component is transmitted through the low-pass filter. As a result, the two components of the signal are divided into two distinct bands and can be sent through separate lines. The ACMD-7606-TR1 also has two switches which can be used to change the diplexer from a combiner to a separator. In a combiner mode, the two components of the signal can be combined for transmission. In a separator mode, the two components are separated and can be sent through separate lines.

Conclusion

The ACMD-7606-TR1 is a type of RF Diplexer designed to combine or separate two signals in the 2450 MHz to 2690 MHz frequency band. The device is mainly used in multimode and switchable cellular systems for increasing the capacity of existing sites. It is also employed in cordless phones, TV broadcasting, and other multimedia applications. The operation of the device is based on its two filters and an inductor-capacitor pair which acts like a diplexer, and two switches which allow it to be used as a combiner or separator.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description