ACPL-217-560E

Output Type:	Transistor
Supplier Device Package:	4-SO
Package / Case:	4-SOIC (0.173", 4.40mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-55°C ~ 110°C
Vce Saturation (Max):	400mV
Current - DC Forward (If) (Max):	50mA
Voltage - Forward (Vf) (Typ):	1.2V
Current - Output / Channel:	50mA
Voltage - Output (Max):	80V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	2µs, 3µs
Turn On / Turn Off Time (Typ):	3µs, 3µs
Current Transfer Ratio (Max):	600% @ 5mA
Current Transfer Ratio (Min):	50% @ 5mA
Voltage - Isolation:	3000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ACPL-217-560E transistor output optoisolator is a type of optoisolator that isolates unwanted electrical noise present in an electronic circuit. It works by converting the normal input signal into a light-emitting diode (LED) output signal, therefore achieving electrical isolation. The ACPL-217-560E optoisolator can be used to simplify high frequency switching applications, provide a high isolation voltage and break the ground loops caused by direct connection of inputs and outputs. The ACPL-217-560E optoisolator provides a low on-state resistance (RON) coupled with low power consumption. It also provides a high degree of reliability and minimized optically induced noise. The device operates in the range of 35mA to 500mA, making it an ideal choice for logic and power drive applications. The ACPL-217-560E optoisolator has excellent light speed response, making it suitable for high-speed switching applications. It has a maximum frequency of 1.2MHz at a 0V input voltage, which is approximately five times higher than the standard opto-coupler. This high light speed response enables fast signal transmission at high frequencies, ensuring accurate transmission of the input signal. Additionally, the optoisolator is immune to noise, which is ideal for applications that involve long electrical lines. The ACPL-217-560E optoisolator uses an NPN transistor as the output element. When triggered, the LED emits light which in turn triggers the output transistor, producing a logic signal. The maximum output current of this optoisolator is 250mA and its maximum output voltage is 30V, which makes it suitable for multiple applications. The maximum ripple noise of the ACPL-217-560E is 150mVpp, which helps in improving the accuracy of the output signal. In conclusion, the ACPL-217-560E optoisolator is an ideal choice for applications requiring high isolation voltage, high frequency switching and low power consumption. It offers a highly reliable connection with minimal risk of noise, high frequency response, and is suitable for multiple applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description