ACPL-4800-060E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ACPL-4800-060 series of opto-isolators are logic output optoisolators, designed for use in the electronic industry. This series of devices uses a gain cell designed to increase signal-to-noise ratios whenUsed in applications involving noise and other transient signals. The ACPL-4800-060 series has the potential to reduce system power consumption by providing a low voltage bidirectional isolation barrier between the primary circuit and the peripheral controlling circuit.

The ACPL-4800-060 series feature a 6-pin optoisolator package and a switching voltage range of 0 to 24V, depending on the model. They also offer a variety of power supply voltages, ranging from 5V to 24V. These devices are available in both single-pole and double-pole configurations.

The ACPL-4800-060 series has been designed to provide opto-isolation in applications where a low-voltage logic signal is used for controlling a signal-sensing device, such as a current detent relay. The use of an opto-isolator eliminates the need for long runs of twisted pair cable, and reduces the risk of ground loops and other interference. It also reduces the risk of failure due to contact bounces.

The ACPL-4800-060 series operates on the principle of photoconductivity. A combination of optically active material and a conducting material is used to create a junction which generates a current when exposed to light. When the current passes through the internal resistance of the optoisolator, it generates a voltage. The output voltage is proportional to the amount of input current. This output voltage can be used to drive a load such as a relay, a lamp, or a motor.

The ACPL-4800-060 is designed to ensure a high degree of isolation between the primary circuit and the output. This isolation eliminates the possibility of stray currents entering the output circuit, and also helps reduce the radiation of conducted noise from the primary circuit. The device, which meets the requirements of UL1577, CSA and VDE, has been tested for safety. It also meets IEC 61439 class I requirements for safe insulation.

The ACPL-4800-060 series of optoisolators is ideal for applications requiring reliable, low-voltage isolation, such as motor control, relays, and industrial measurement systems. It is suitable for applications where the input is a low-voltage logic signal and the output needs to be controlled with a higher-voltage signal. These devices are compatible with a wide range of input and output voltages and current ratings, making them suitable for a variety of applications.

The specific data is subject to PDF, and the above content is for reference