ACPL-K63L-500E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators, or optocouplers, are optically based isolation components used primarily for the purpose of electrical isolation. A common type of optocoupler is the logic output optoisolator, which is used to transfer digital signals from one circuit to another while maintaining electrical isolation between them. Examples of this type of optocoupler include the ACPL-K63L-500E, which is a single-channel, low-drive, 4-pin optocoupler containing an LED or light-emitting device and detector on the input side and a logic-compatible output on the output side. As such, it can be used for the transmission of logic levels.

The ACPL-K63L-500E, when powered, provides a 5V nominal supply voltage on the input side and logic-compatible output stages on the output side. This optocoupler consists of an LED, a detector, and a logic-compatibly-configured output. The logic-compatible output consists of a logic-high level (V0H) of 4.5V, a logic-low level (V0L) of 0.2V, and an output current (I0) of 4mA maximum. The detector consists of a 2N2222A transistor with a gain of 30.

The optocoupler works by using the LED to transfer light energy from the input side to the detector on the output side. When the output is at a low logic level, the LED will be off and the detector will block current, driving the output low. When the input is in a logic-high level, the LED will be on, allowing light energy to pass through to the detector and energize it, thus turning on the transistor in the detector and driving the output to its high logic level. The detector thus acts as a buffer between the input and the output, effectively isolating the input from the output.

The ACPL-K63L-500E optocoupler is suitable for applications requiring noise immunity, as well as interfacing signals between low-voltage and high-voltage circuits. Typical applications include data transmission lines, motor speed control, and isolated power supplies. In medical applications, the optocoupler can also be used to protect medical equipment from the effects of electrostatic discharge. Additionally, since the optocoupler provides logic-compatible outputs, it can be used to control digital circuits in microcontroller applications. Generally, this type of optocoupler is designed and tested for operation under standard environmental conditions.

In summary, the ACPL-K63L-500E optocoupler is an excellent choice for logic-level applications such as data transmission lines, motor speed control, and isolated power supplies. It provides high levels of electrical isolation between the input and output sides and is designed and tested to operate under standard environmental conditions. This type of optocoupler is also suitable for medical applications and can be used to control digital circuits in microcontroller applications.

The specific data is subject to PDF, and the above content is for reference