ACPL-M46T-000E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ACPL-M46T-000E is a part of optoisolators that specifically falls under logic outputs. This particular optoisolator is an AC output, which means that it can handle low-level high quality signals between two isolated circuits. It is a zero-cross technology that helps isolate the input from the output. It is easy to incorporate into any system and comes with a low power LED, which causes an output transistorthat can sink or source logic signals in a variety of communication protocols. This particular device also comes with a variety of door latches, safety interlocks, and other electronic security systems.

Optoisolators are generally used for electrical isolation, especially when transmitting low power signals between two different circuits. These devices create an electrical barrier that prevents any form of electrical interference, as well as increasing the noise immunity of the entire system. They also make sure that any potential faults are detected and fault currents are limited. Most optoisolators also come with their own protection from over-voltage, over-current, and other surges.

ACPL-M46T-000E specifically uses a very low current transfer mechanism, which helps to increase the immunity of the system to noise and protect it from any electrical surges. This optoisolator works by using a combination of a light emitting diode (LED) and a transistor, both of which have their own specific purpose. The LED is used to transmit low level signals between the two circuits, while the transistor is used to sink or source logic signals.

In operation, the LED is powered when the signal from the primary circuit is received. The LED then generates a low intensity visible light that is used to control the conduction of the output transistor. The transistor is then used to source or sink the logic signal depending on the configuration of the optoisolator. Since the transfer of the signal is done via light, the signal is isolated from electrical noise and interference, which ensures that the logic signal is transferred accurately.

ACPL-M46T-000E optoisolators can also be used in a variety of applications beyond just logic output, such as lighting fixtures, motor controllers, door stops, and safety interlocks. Some of these systems require that the optoisolator be used as a voltage follower or current source. In such a case, the LED and transistor are wired in series with the primary and secondary circuits. In this configuration, the LED is used to limit the current flow, while the transistor is used to make sure that the logic signal is accurately transferred from the primary to the secondary circuit.

This particular optoisolator is also designed to work with a range of communication protocols. The range of protocols available include RS232, RS485, and CAN bus. This is particularly useful when communicating with other systems or devices that require specific communication protocols.

ACPL-M46T-000E optoisolators are a versatile and reliable logic output option. They are designed to be used in a variety of applications, from security systems to motor controllers. They offer high noise immunity, and, with their low power LED and transistor combination, are able to accurately source or sink logic signals in a range of communication protocols. This makes them a reliable choice for any application that requires constant, reliable communication.

The specific data is subject to PDF, and the above content is for reference