ACPL-M61L-060E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are an important class of components used in electrical and electronic systems. They are used to electrically isolate circuits, preventing interference between circuits by allowing signals to be transmitted from one to other without physical connection.

The ACPL-M61L-060E is a logic output optoisolator with operational voltages between 6 and 36V. The device allows signals to be transmitted across devices while avoiding permanent damage and difficulties associated with higher level voltages. The optoisolator contains a light-emitting diode (LED) which is optically coupled to a photo transistor. It uses DC current to drive the LED and the corresponding voltage generated by the photo transistor is in the range of 1.4 to 5.5V. There are two main types of optoisolators with logic outputs; one is NOR and the other is NAND.

Application Field

The ACPL-M61L-060E has a wide range of applications in industrial and commercial electronic systems. The optical isolation provided by this optoisolator makes it ideal for interfacing two circuits that are not galvanically connected. It is also used in motor control, power supplies, telecommunications, instrumentation, and medical equipment. It is suitable for high-speed data communication between systems that require isolation, such as field buses.

Working Principle

The ACPL-M61L-060E works using an LED and a photo transistor that are electrically isolated from each other. The LED is driven by DC current and emits a light beam that is intercepted by the photo transistor. The photo transistor then produces a voltage which is proportional to the strength of the LED beam. The output voltage is then compared to the input voltage, if the output voltage is higher than the input voltage the device is in a NAND state, and a low signal is produced. If the output voltage is lower than the input voltage, the device is in a NOR state and a high signal is produced. Thus the optoisolator is able to isolate two circuits while still transferring signals between them.

In summary, the ACPL-M61L-060E is a logic output optoisolator with operational voltages between 6 and 36V. It is used to isolate two circuits while still transferring signals between them without potential damage to the devices due to high voltage level. The device can be used in a wide variety of applications such as motor control, power supplies, telecommunications, and medical instrumentation. It works by having an LED and a photo transistor that are electrically isolated from each other and produces a high or low signal depending on the voltages being compared.

The specific data is subject to PDF, and the above content is for reference