ACPL-M61L-560E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are optoelectronic devices that provide electrical insulation between input and output of the isolator. The ACPL-M61L-560E is considered one of these optoisolators, constituted by a logic output module, and it is employed in order to supress voltage transients, as well as to ensure safety system operation.

The most common application of the ACPL-M61L-560E is a power surge protector in industrial and automotive applications. This isolator module provides great protection against different kinds of electrical transients, as overvoltage, radiation, lightning, fast current surge and high-frequency noise. This module can be used in both outdoor and indoor environments, and has been tested in many different electric equipments in order to validate its performance.

The ACPL-M61L-560E optoisolator is usually furnished in a through-hole type of resistor package, with a plastic material, waterproof, and designed to meeting the requirements for PC board assembly surface mount. This brings a lot of advantages, like taking less space in the printed circuit board and creating a stronger connection.

The design of the ACPL-M61L-560E consists of two sides: the input side and the output side. The module contains an LED as an input element, and a phototransistor as an output element. The LED is fed by a voltage that can go up to 90V and the output device is sensitive to a current that could reach up to 40mA. There is also a voltage drop of 3V in the optoisolator, in order to trigger the output element.

Since the LED can\'t be turned off, the input side of this isolator uses an NPN transistor to control it. The LED is connected between ground and the emitter of this transistor, and when the voltage in the base of the transistor goes over a certain threshold, the LED gets turned ON.

The output side, which is the phototransistor, is placed in the proximity of the LED, facing the emitter. The phototransistor is an NPN bipolar transistor, which means that it is has a base, an emitter and a collector. The collector and the base are connected together, forming the output circuit, and the LED and the emitter are connected in parallel. When the LED is turned on, it generates light, which charges the base and collector of the phototransistor and produces a current in the output circuit.

By using this device in a logic circuit, the current that flows through the output circuit of the ACPL-M61L-560E can be used to control other elements in the circuit, such as transistors, relays, etc. This makes it a very useful isolator for any type of logic circuits and provides a high level of protection against different types of disturbances and transients.

The ACPL-M61L-560E is a great choice for industrial and automotive applications, as it provides great insulation and can work in extreme conditions, like wide temperature and pressure ranges. The optoisolator can be used in a variety of different circuits, and depending on its configuration, can protect not only from voltage transients, but also from interference, surge currents and radiation.

This optoisolator offers great protection against electrical disturbances, and at the same time is suited for many different types of application, being able to trigger other components when turned on. With its high insulation, the ACPL-M61L-560E is a great choice for any kind of logic circuit.

The specific data is subject to PDF, and the above content is for reference