ACPL-M62L-000E

Optoisolators - Logic Output

The ACPL-M62L-000E optocoupler is an isolation logic output device, consisting of an AlGaAs infrared emitter, optically coupled with a high gain phototransistor. It offers the following properties that are ideal for isolation applications: fast response time, high CTR, 5kV of input-output isolation, and wide common mode Áotage range. In applications where this device is used, the output is a logic level electrical signal driven by the input optical signal. This means that if the signal going into the optocoupler is an optical one, the signal out will become electrical, and vice versa.

Applications of the ACPL-M62L-000E

The ACPL-M62L-000E optocoupler can be used in various applications that require the transport of signals across an isolation barrier without any degradation of the signal. Examples of this include applications such as motor speed control, process control, power supply monitoring, data transmission lines, and logic isolator applications. In addition, the ACPL-M62L-000E can also be used in sensor interface circuits, providing isolation between the two devices. This can be useful when interfacing two digital communication products.

Working Principle of the ACPL-M62L-000E

The ACPL-M62L-000E is an optically coupled logic output device which operates on the same principle as most other optocouplers. When a signal travels along the optical signal paths from the emitter to the detector, a current flows across the two leads of the phototransistor. This current is then amplified and output as a logic level signal by the detector. This enables a signal to be isolated between the input and output. It should be noted that, in order for the device to work properly, it must be connected to a driven power source and a suitable load. The ACPL-M62L-000E has an isolation voltage rating of 5kV, which makes it suitable for a variety of applications.

Conclusion

The ACPL-M62L-000E optocoupler is an isolation logic output device with a wide range of applications. It is designed to provide insulation between two electrical signals, enabling them to be transmitted across an isolation barrier. The device is fast in response time, has a high CTR, and 5kV of input-output isolation. It is designed with an AlGaAs infrared emitter optically coupled to a high gain phototransistor. This device is suitable for a variety of applications such as motor speed control, process control, power supply monitoring, data transmission lines, and logic isolator applications.