ACPL-W346-560E

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Isolators - Gate Drivers are used to clamp a signal in a cross-coupled driver circuit. For example, ACPL-W346-560E isolator, is a type of gate driver circuit where the output is fed back to the input with a feedback capacitor, and the current flow is limited by a resistor. In this application, a single resistor is used to act as the current sensor and maintain the input and output signals are within an acceptable range for the system.

The ACPL-W346-560E isolator consists of a single-pole, single-throw (SPST) switch whose common terminal is connected to the resistor. The current flow through the switch is limited by the resistance, thus ensuring an even and consistent current between the terminals. The output is then sent to the system’s main power supply. This ensures that the maximum voltage and current through the switch are within the acceptable range for the system.

The ACPL-W346-560E isolator can be used in a variety of applications. For example, it can be used to protect sensitive equipment from input voltages higher than it can handle. It can also be used in a motor drive system to make sure the motor is not over-driven on start-up. Additionally, it can be used as a controller for an inductive load such as motor systems and transformers. The ACPL-W346-560E can also be used as a power saving device for computer systems.

The ACPL-W346-560E isolator has a working principle that is based on an open-circuit gate driver. This allows the device to control the amount of current that flows through it when it is closed. When the voltage is applied across the resistor, the current flows through the switch and is limited by the resistance. This ensures that the correct voltage and current goes to the output. The current and voltage are then further limited by the resistor which allows for better control of the system.

The ACPL-W346-560E isolator is designed for the low power application environment and is specifically meant to be used for low power applications. It has a wide I/O range of up to 15 volts and up to 0.1 Amps. Furthermore, the device is designed to be reliable and can be used for a long period of time without any issues.

In summary, the ACPL-W346-560E isolator is a practical and versatile gate driver circuit that can be used to reduce the risk of input voltages exceeding the allowable limit. It works based on the principle of open-circuit gate drivers, that allows the device to control the amount of current that flows through it. Furthermore, it is designed for reliability and can be used in many different applications.

The specific data is subject to PDF, and the above content is for reference