ACPL-W50L-500E

Output Type:	Transistor
Supplier Device Package:	6-SO Stretched
Package / Case:	6-SOIC (0.268", 6.80mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 105°C
Vce Saturation (Max):	--
Current - DC Forward (If) (Max):	20mA
Voltage - Forward (Vf) (Typ):	1.5V
Current - Output / Channel:	8mA
Voltage - Output (Max):	24V
Series:	--
Input Type:	DC
Rise / Fall Time (Typ):	--
Turn On / Turn Off Time (Typ):	200ns, 380ns
Current Transfer Ratio (Max):	200% @ 3mA
Current Transfer Ratio (Min):	93% @ 3mA
Voltage - Isolation:	5000Vrms
Number of Channels:	1
Part Status:	Active
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction
Optoisolators are isolation devices that allow for electrical isolation between the input and output signal of a circuit. They use a combination of an LED and a phototransistor to convert an electrical signal into a light signal that is then converted back into an electrical signal at the other end. The ACPL-W50L-500E is a type of optoisolator that uses a transistor and a photovoltaic output to provide isolation. In this article, we will discuss the application fields and working principles of the ACPL-W50L-500E.

Application Fields
The ACPL-W50L-500E is an optoisolator that is suitable for a variety of applications, including signal transmission, signal isolation, and data communications. The device can be used to replace bulky isolation transformers in AC-coupled applications and AC/DC converters in DC-coupled applications. It is also suitable for applications in industrial control systems, isolating different circuits, and protecting low voltage signs from high voltage signals. In addition, the ACPL-W50L-500E has been tested for compatibility with medical and process control applications.

Working Principle
The ACPL-W50L-500E is a single transistor optoisolator device that uses a photovoltaic output to provide electrical isolation between the input and output signal. The device works by using an LED to convert an electrical signal into a light signal which is then received by a phototransistor. The phototransistor converts the light signal back into an electrical signal and then passes the signal through an amplifier, which drives the output stage. The optoisolator provides voltage isolation of up to 3 kV RMS between the input and output signals. The device is available in a variety of packages including DIL, SMT, and TO-5 versions.

Conclusion
The ACPL-W50L-500E is a type of optoisolator that uses a transistor and a photovoltaic output to provide electrical isolation between the input and output signals. It is suitable for a variety of applications, including signal transmission, signal isolation, and data communications. The device works by using an LED to convert an electrical signal into a light signal which is then received by a phototransistor, and then passes the signal through an amplifier, which drives the output stage. The optoisolator provides voltage isolation of up to 3 kV RMS between the input and output signals.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description