ACS706ELC-05C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current Transducers are devices that measure electrical current. Their primary purpose is to detect the magnitude of an electrical current flowing through an electrical circuit. This measurement can be used for a variety of applications including monitoring, analysis, rectifiers, and protection. The primary types of current transducers are Rogowski, Shunt, Rogowski-Shunt, Hall Effect, and Ohmic. The ACS706ELC-05C is a Hall Effect current transducer, and is a member of Allegro MicroSystem’s family of low-cost, AC/DC current transducers.

The ACS706ELC-05C has been designed to be used in applications where low power consumption and cost are critical design factors. The device includes two circuits, an amplifier and a Hall element module. The Hall element module is comprised of a Hall effect element (usually a thin film of aluminum) and an on-chip signal processor. The amplifier section is comprised of a low power operational amplifier. The device is designed to be powered with either AC or DC current, and has a low power consumption of approximately 850uA. The output from the amplifier is a function of the AC or DC input current, and is then used to calculate the input current magnitude.

The most common applications for the ACS706ELC-05C current transducer are in industrial electrical motor drives, light dimmers, and home automation systems. The device is also used as an alternative to traditional Rogowski current transducers. It has been designed to operate over a wide temperature range and is capable of operating with a low impedance load impedance (1Ω minimum). The device is also designed to be easily integrated into customer designs and can be used with a variety of interface protocols, such as I2C, UART, and SPI.

The working principle of the ACS706ELC-05C current transducer is based on the Hall Effect. The Hall Effect is a physical phenomenon in which a transverse electric field is generated when a current is passed through a magnetic field. The magnitude of the electric field is proportional to the applied current. The device consists of an array of Hall effect elements, which are arranged in a diamond formation. When a current is applied to the element, the element generates a voltage that is proportional to the current. The voltage is then amplified and output as an analog signal.

The device is available in various package types, such as leadless SIP and DIP, surface mount, and top and side mount packages. The device has a rated primary current range of 200AAC (1.0V sensitivity) to 0.2AAC (100mV sensitivity), a frequency range of 5kHz to 1MHz, a maximum current range of 500A, and a minimum sensitivity of 0.4V/A. It also has a low offset voltage, which is typically less than 1mV. The device is also designed for low power consumption and has a quiescent current of 850uA.

In conclusion, the ACS706ELC-05C is a low cost, low power Hall Effect current transducer from Allegro MicroSystems. It is designed for applications where cost and power consumption are critical factors. The device is capable of measuring AC or DC current, and has a wide temperature range. The device is easy to integrate into existing designs and has a low offset voltage. The device is ideal for motor drives, light dimmers, and home automation applications, and can be used as an alternative to traditional Rogowski-Shunt current transducers.

The specific data is subject to PDF, and the above content is for reference