ACS755KCB-150-PSF

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Current Transducers

The ACS755KCB-150-PSF is a type of current transducer designed to measure and monitor the current signal and output it as an analog voltage. It is capable of sensing the phase AC or DC current from 150A to 200A, implemented as a layer-trippable, single-phase bidirectional three-wire sensor system with an output of 4V to 20mA.

The transducer requires a single supply for proper operation between 10V to 24V DC, and recovers power from both positive and negative rails. There is a low-level output for current measurements between 4mA and 20mA, which is proportional to the input current. The nature of the field generated by the transducer is dependent on the current, with the output current going through zero to a positive or negative value as the current increases or decreases, respectively. The output current is scaled according to 12 bits ADC resolution.

Working Principle

The working principle of ACS755KCB-150-PSF transducer comes down to a very simple concept. It is a type of current sensor that works by sensing the current signal and producing a proportional analog voltage output. The incoming signal is sensed by a specially designed Hall Effect device. This device measures whether the electric field’s associated with the incoming current, moving the Hall Effect through a magneto resistive component, to alter the direction of a current.

The internal components of the transducer consist of a number of integrated circuit (IC) components. The Hall Effect IC will measure the magnetic field generated by the incoming signal current. The Hall Effect will then feed the current signal into the analog transducer IC, which will convert the signal into an analog voltage. The transducer’s output can then be used to measure or monitor the electric current either in AC or DC circuits.

The output can be adjusted to different numerical ranges depending on the level of precision required. This adjustment can be done by using external components like resistors and capacitors to control the input and output current of the transducer.

Application Field

The ACS755KCB-150-PSF current transducer can be used for a variety of applications including energy monitoring, motor current monitoring, home automation, lighting control, and solar panel monitoring. It is also useful for providing over-current protection in electrical systems as it can be used to detect power outages and trips.

The transducer can also be used in renewable energy systems to monitor the power efficiency of solar panels. It can also be used in major projects with several thousand sensors, such as wind power and large motors, where the transducer can measure the current running through the system.

The ACS755KCB-150-PSF current transducer is a reliable, compact device that is suitable for a wide variety of applications and can be used to measure from 30mA to 200A AC or DC current. With its various adjustable ranges, high accuracy and good repeatability, this transducer can be used to accurately monitor current levels in a wide variety of environment.

The specific data is subject to PDF, and the above content is for reference