ACSL-6420-00TE

Data Rate:	15MBd
Supplier Device Package:	16-SO
Package / Case:	16-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 100°C
Voltage - Supply:	3 V ~ 5.5 V
Current - DC Forward (If) (Max):	15mA
Voltage - Forward (Vf) (Typ):	1.52V
Rise / Fall Time (Typ):	30ns, 12ns
Propagation Delay tpLH / tpHL (Max):	100ns, 100ns
Series:	--
Current - Output / Channel:	50mA
Output Type:	Open Collector, Schottky Clamped
Input Type:	DC
Common Mode Transient Immunity (Min):	10kV/µs
Voltage - Isolation:	2500Vrms
Inputs - Side 1/Side 2:	2/2
Number of Channels:	4
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ACSL-6420-00TE Application Field and Working Principle

Optoisolators are optoelectronic components that are used to separate a low powered circuit from a higher powered one. The ACSL-6420-00TE from Avago Technologies is an example of a logic output optoisolator. It is used to provide LEDs for visual indication, and its high voltage output provides good isolation between circuits.

Application Field

The ACSL-6420-00TE is a logic output optoisolator, and it can be used in a variety of applications such as communication, automation, and alarm systems. It can be used as an optocoupler for switching applications, and its high voltage output can be used to provide power and control the on/off switch of a motor or other mechanical device. In addition, it can be used as a timer or frequency feedback loop to provide control signals. The ACSL-6420-00TE can be used as an isolated signal amplifier, and it is often used in signal transmission applications. It can be used in a differential signal transmission system to prevent ground loops and other electrical interference. It is also able to protect against electrical surges and other power issues. The ACSL-6420-00TE has also been used in alarm systems and optical alarm systems as well as motion detectors and other security systems.

Working Principle

The working principle of the ACSL-6420-00TE relies on the use of an LED and a phototransistor. When an electrical current is applied to the LED, it emits light which is detected by the phototransistor. The phototransistor is then able to convert the light into a high-voltage output. This output is then used to control the on/off switch of a motor or other application.The ACSL-6420-00TE also utilizes a current and voltage protection circuit to help protect the circuits from surges and other electrical problems. This circuit helps to prevent the circuits from short-circuiting or other dangerous occurrences that could damage the device. Lastly, the ACSL-6420-00TE has a small vertical slot on its base that allows the LED and phototransistor to be precisely aligned. This helps the device to be able to detect even small changes in light.

Conclusion

The ACSL-6420-00TE is an optoisolator that provides visual indication and high voltage outputs. It has a wide range of applications such as communication, automation, and alarm systems. The working principle of the ACSL-6420-00TE is based on the use of an LED and a phototransistor, which are precisely aligned in the small vertical slot on the base. The device is also equipped with a current and voltage protection circuit to protect the circuits from surge and other electrical problems.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description