AD5162BRM10

Series:	--
Packaging:	Tube
Part Status:	Obsolete
Taper:	Linear
Configuration:	Potentiometer
Number of Circuits:	2
Number of Taps:	256
Resistance (Ohms):	10k
Interface:	SPI
Memory Type:	Volatile
Voltage - Supply:	2.7 V ~ 5.5 V
Features:	--
Tolerance:	±20%
Temperature Coefficient (Typ):	35 ppm/°C
Resistance - Wiper (Ohms) (Typ):	160
Operating Temperature:	-40°C ~ 125°C
Package / Case:	10-TFSOP, 10-MSOP (0.118", 3.00mm Width)
Supplier Device Package:	10-MSOP
Base Part Number:	AD5162

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AD5162BRM10 Digital Potentiometer Application Field and Working Principle

AD5162BRM10 Digital Potentiometer is a digitally controlled, 256-tap device which is used to replace traditional mechanical potentiometers or traditional digital pots. The AD5162BRM10 Digital Potentiometer is used in a wide range of applications, from volume control in consumer electronics to transformers, pumps and motors in industrial automation to antenna controls for wireless communications. The AD5162BRM10 Digital Potentiometer can also be used as a voltage divider and as the feedback element in an analog circuit.

Application Fields

Consumer Electronics Applications

The AD5162BRM10 Digital Potentiometer can be used in consumer electronics applications such as audio volume control, TV/ DVR volume/ blurb/ brightness control, mobile phone/ camera/ tablet PC volume control and output impedance adjustment. As a digitally controlled device, the AD5162BRM10 Digital Potentiometer provides much tighter control over the user interface, which is important in consumer electronics devices.

Industrial Automation Applications

In industrial automation applications, the AD5162BRM10 Digital Potentiometer can be used for motor controls, actuators, and heating/ cooling transformers. The digital control of the device allows for precise adjustment of the parameters of these various motors, transformers and actuators. The AD5162BRM10 Digital Potentiometer is also used as part of the feedback loop in industrial automation, which helps to reduce cost and increase performance.

Telecommunication Applications

The AD5162BRM10 Digital Potentiometer can be used as an antenna tuner/ attenuator in Wireless communication systems. As a digitally controlled device, the AD5162BRM10 Digital Potentiometer can provide precise control over the antenna frequency and attenuation with minimal circuit complexity.

Working Principle

The AD5162BRM10 Digital Potentiometer is an integrated circuit consisting of a resistor array, associated logic, an SPI interface, and digital control logic. The resistor array is divided into multiple taps, which can be individually adjusted with digital control signals. The digital control signals are provided by an SPI interface. During operation, the digital control signals are used to control the resistance between any two of the 256 taps.TheAD5162BRM10 Digital Potentiometer enables the user to digitally program and adjust the resistance between any two of the taps in the resistor array. With 256 available taps, the circuit can be adjusted from 1Ω to 10KΩ in 1Ω increments. The user can select any two of the taps to set the resistance between them. This provides a high degree of programmability and flexibility to the user.The AD5162BRM10 Digital Potentiometer also consists of an internal non-volatile memory, which stores the resistance values of the taps and allows the user to store and recall different resistance values. The internal non-volatile memory allows the user to store the setting of the device even while the power is off.

Conclusion

The AD5162BRM10 Digital Potentiometer is a digitally controlled, 256-tap device which is used to replace traditional mechanical potentiometers or traditional digital pots. The AD5162BRM10 Digital Potentiometer is used in a wide range of applications, from volume control in consumer electronics to transformers, pumps and motors in industrial automation to antennacontrols for wireless communications. The device is also used in feedback loops for precision control of motors and transformers, as well as for voltage divider circuits. The AD5162BRM10 Digital Potentiometer contains a resistor array with 256 taps and a corresponding SPI interface for digital control. The internal non-volatile memory enables the user to store and recall different resistance values. This makes the AD5162BRM10 Digital Potentiometer an ideal candidate for a wide range of data acquisition, digital potentiometer and interface applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description