AD5254BRUZ10-RL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD5254BRUZ10-RL7 is a analog-to-digital (DAC) data conversion product that is part of the family of digital potentiometers. It is used to digitally control fine level adjustments with minimal external components. The device consists of a non-volatile memory array, an internal voltage reference, control logic, and operational amplifier structures. The internal circuit can be divided into three main blocks: the non-volatile memory array, logic and control circuitry, and amplifier systems.

The non-volatile memory array in the AD5254BRUZ10-RL7 stores up to 16 static adjustments which can be used for analog applications. This allows for easy user settings to be programmed in, as well as storing settings from previous uses. The memory array utilizes a E2CMOS technology which ensures the data stored in the device will remain intact during power loss.

Logic and control circuitry are contained in the device, consisting of a 3-bit control input and 5-bit address input. The 3-bit control input regulates the operating mode of the device, while the 5-bit address input is used to access the desired location in the memory array. The device is controlled remotely through an I2C interface, which allows communication to the internal E2CMOS memory.

The analog amplifier systems, consisting of a programmable resistor and two operational amplifier stages, are responsible for the accurate generation and guidance of the analog signals required for the application. The programmable resistor is composed of a series of thin-film resistors and switches which can select any resistor value in between the maximum and minimum specified by the user. The variable resistor is used to adjust the analog signal level to the desired value. The gain of the amplifier can be adjusted by varying the programmable resistor, allowing one to achieve uniform gain across the channels.

The AD5254BRUZ10-RL7 digital potentiometer is most commonly used in data acquisition devices as it provides a digital control of fine level adjustments with minimal external components. It is ideal for applications that require analog control signals, such as temperature and pressure instrumentation, consumer electronics, process control, and audio and video systems. Additionally, the device operates at low power consumption and is available in a small 10-lead MSOP package.

The specific data is subject to PDF, and the above content is for reference