AD7824UQ

Number of A/D Converters:	1
Base Part Number:	AD7824
Supplier Device Package:	24-CDIP
Package / Case:	24-CDIP (0.300", 7.62mm)
Operating Temperature:	-55°C ~ 125°C
Features:	--
Voltage - Supply, Digital:	5V
Voltage - Supply, Analog:	5V
Reference Type:	External
Architecture:	Flash
Series:	--
Ratio - S/H:ADC:	1:1
Configuration:	MUX-S/H-ADC
Data Interface:	Parallel
Input Type:	Single Ended
Number of Inputs:	4
Sampling Rate (Per Second):	50k
Number of Bits:	8
Part Status:	Active
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction of AD7824UQ

AD7824UQ is an 8-bit analog-to-digital converter (ADC) from Texas Instruments. It features power-saving features and is available in 3.5mm x 3.5mm QFN packages. This device is impressively accurate and has low latency, providing continuous conversion for up to 16 channels of 8-bit data with a conversion rate of up to 200KHz per channel.

Application Field and Working Principles of AD7824UQ

AD7824UQ can be used for a variety of data acquisition applications including image sensors, motion detection, temperature and pressure sensors, analog-to-digital signal conversion, and of course, applications requiring general purpose conversion of analog signals to digital data. AD7824UQ has the ability to convert analog signals such as voltage, current, or temperature into a digital equivalent. The conversion process is simple and requires only two steps. Firstly, a voltage reference is applied to the input pins, and then the input signal is applied to the same pins. Then, by comparing the signal to the reference, the device converts the signal into a digital signal. The ADC also features an internal 8-bit DAC (Digital to Analog Converter) which uses the noisy input signal to generate an output signal which is more stable and accurate than the original signal. The DAC takes the 8-bit digital conversion result and compares it with the reference signal to generate a higher resolution signal. This higher resolution signal, in turn, is fed back to the ADC for more accurate conversion. AD7824UQ uses a multi-step programmable control and timing logic to process multiple simultaneous channel input signals and to perform sequential conversions. An internal clock generator provides synchronization and control signals for the converter and the DAC.The device also contains on-chip test circuitry, allowing the user to perform self-test (open loop) and calibration operations for each of the channels. In addition, the on-chip test circuitry can be used to measure the device\'s noise, offset, gain and linearity performance.

Conclusion

AD7824UQ from Texas Instruments is an 8-bit analog-to-digital converter that is capable of converting analog signals such as voltage, current, or temperature into digital signals. It features a multi-step programmable control and timing logic for processing multiple input signals and for performing sequential conversions. The device also contains on-chip test circuitry, allowing the user to perform self-test (open loop) and calibration operations for each of the channels. AD7824UQ is suitable for a variety of applications, including image sensors, motion detection, temperature, and pressure sensors, and analog-to-digital signal conversion.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description