AD7863ARZ-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition from Analog to Digital Converters (ADC) is a process of converting analog voltage to digital signals for use in digital technology. One of the most popular ADC converters is the AD7863ARZ-3, which is suitable for applications where digital output signals for processing are desired.

The AD7863ARZ-3 is a three-wire serial interface ADC with an on-chip voltage reference (VREF) and a temperature-compensated 8-bit digital output. The converter has a maximum clock frequency of 12MHz, 10mV LSB resolution, and operates from a single 3V power supply. The AD7863ARZ-3 has a fast settling time of 250ns and a maximum conversion time of 1µs. The ADC has a wide input range of 0 to VREF and a reference voltage accuracy of ± 2%. It is also fully temperature-compensated for a temperature range of -40°C to +125°C.

The AD7863ARZ-3 has a wide range of application fields due to its improved performance characteristics. It is a suitable solution for industrial control and automation applications, such as motor control systems and temperature measurement systems. Additionally, it is used in consumer electronics and medical instrumentation, such as blood pressure monitors and glucose meters. The ADC can be used to measure the analog signal source in data acquisition systems, such as automobile temperature detection, signal filtering, and noise reduction.

The AD7863ARZ-3 ADC follows a three-wire serial interface protocol to convert analog data into digital data. This protocol uses a CS pin as the active-low chip select signal, a RD pin to read the data, and a SI pin that acts as the serial input data. The converter also has an SHDN pin that is used to power down the converter in sleep mode. There is also a master clock input (SCK) to drive serial data in the converter.

The AD7863ARZ-3 ADC uses a successive approximation register (SAR) architecture to convert the analog input signal into a digital output code. The SAR uses an internal voltage reference, which is compared to the input signal in a successive comparison loop. The process starts by setting the MSB in the output data register to a logic high, and then the next lower bit is set until the measured voltage and voltage reference are equal. The digital output code is then obtained and sent to the output register.

The AD7863ARZ-3 is an ideal choice for applications requiring low power consumption and high accuracy. It is cost-effective and suitable for most applications due to its low noise and built-in voltage references. Its ease of use and wide range of input range makes it a great choice for automated, high-precision systems that require digital operations. Many of the data acquisition applications such as temperature measurement, motor control, and signal filtering can be performed in both industrial and consumer contexts with the AD7863ARZ-3.

The specific data is subject to PDF, and the above content is for reference