AD8041AR-REEL7

Voltage - Input Offset:	2mV
Base Part Number:	AD8041
Supplier Device Package:	8-SOIC
Package / Case:	8-SOIC (0.154", 3.90mm Width)
Mounting Type:	Surface Mount
Operating Temperature:	-40°C ~ 85°C
Voltage - Supply, Single/Dual (±):	3 V ~ 12 V, ±1.5 V ~ 6 V
Current - Output / Channel:	50mA
Current - Supply:	5.8mA
Series:	--
Current - Input Bias:	1.2µA
-3db Bandwidth:	170MHz
Slew Rate:	170 V/µs
Output Type:	Rail-to-Rail
Number of Circuits:	1
Amplifier Type:	Voltage Feedback
Part Status:	Obsolete
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

AD8041AR-REEL7 is an instrumentation amplifiers or output amplifier IC, belonging to the family of linear amplifiers. It was especially designed to be used as a signal amplifier in instrumentation applications. The AD8041AR-REEL7 is featured with a wide common mode input voltage range and a low offset voltage output of 0.5 mV. It also has an ESD rating of 8 kV and can be operated to a power supply voltage of up to 13 V. It allows for a maximum of 25 MHz of frequency in operation. The device offers low power consumption, with average supply current of 8 mA and 6.9 μA in standby. The AD8041AR-REEL7 has a dual input stage with CMOS input, where the input impedance is about 1 TΩ for both high and low level. This improves noise immunity by making the amplifier resistant to RF interference and high frequency noise. The single-ended output is capable of sourcing and sinking up to 12 mA output current. The output voltage is usually connected to an A/D converter, where the output can range up to 1.2 V peak. The AD8041AR-REEL7 is packaged in a 8-pin SOIC and operates at the industrial temperature range of −40°C to +85°C. The device is also RoHS compliant and is manufactured with halogen-free and lead-free materials, which make it highly suitable for industrial and commercial application. Most instrumentation applications such as NF measurements, audio signal processing, multi-channel oscilloscopes and data acquisition systems use the AD8041AR-REEL7. It is also used in automotive systems such as engine control, airbag and active safety feature. The device works by amplifying signals usually from instruments or other transducers, and the amplified signal is then used for measuring, controlling and feedback. The AD8041AR-REEL7 is designed to accept a small input signal, amplify it and then provide a corresponding output which can be fed to measuring and controlling circuits. The working principle of the amplifier can be summarised as follows. Firstly the input signal is amplified by the input stage, then the amplified signal is fed to the gain stage where it is further amplified and finally the output stage produces an amplified output signal. The output of the amplifier is usually proportional to the input signal and can be adjusted by changing the bias current. The gain of the amplifier can also be adjusted with external resistors. In conclusion, the AD8041AR-REEL7 is a linear amplifier IC that is primarily used for instrumentation and automotive applications. It is designed to amplify a small signal and provide a corresponding output which can be fed to measuring and controlling circuits. The gain, bias and output current of the amplifier can all be adjusted with external components. Moreover, the device is packaged in an 8-pin SOIC and is manufactured with halogen-free and lead-free materials, which make it highly suitable for industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description