AD8058AR-REEL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD8058AR-REEL7 is a part of Linear-Amplifiers-Instrumentation, OP Amps, Buffer Amps. This device logic amplifier is designed for precision signal transmission in a variety of analog and digital applications. Specifically, the device offers a signal gain of up to 16 dB with a very wide bandwidth from 0 Hz to a maximum of 70MHz plus an asymmetric off-set option. It has a low output current noise of 5.3uVrms and the power supply noise of -118dBrms.

The AD8058AR-REEL7 features a 3-line-to-a-common configuration, which provides superior balanced signals. It is also versatile enough to support both single-ended and differential signals as well as CMOS logic and TTL logic input. In addition, the device offers a wide supply range of 3.3V to 7.3V and a low power dissipation of 0.7mW.

The AD8058AR-REEL7 can be used in a wide range of applications such as precision signal transferring, signal-to-noise improvement, video signal amplification, instrumentation amplifiers, and telecom applications. Moreover, the AD8058AR-REEL7 range is ideal for noise-sensitive applications such as remote sensing systems, radio frequency (RF) transceivers, medical imaging, industrial controls, and automotive electronics.

The operating principle of the AD8058AR-REEL7 relies on the amplification mechanism, allowing it to not only increase the gain of weak signals but also reduce noise. It utilizes a three-stage core circuit which is composed of differential bipolar junction transistors (BJT). The 1st stage is a pre-amplifier which receives an input signal and converts it into a low amplitude high frequency signal. The 2nd stage is an amplifier which is responsible for the gain control. It includes an adjustable current mirror feedback loop that provides adjustable gain. The 3rd stage is the output buffer which boosts low level signals and supplies current to the load. Thus, the output voltage is in perfect synchronism with the input signal and is converted into an amplified signal.

The AD8058AR-REEL7 parts are fabricated and packaged in accordance with JEDEC standards. The device is a RoHS-compliant surface-mount device (SMD) with the Sustainability Certification from Embedded Quality. It is made from the most highly qualified components, including a plastic marking closure and a heat-dissipating bed of thermoplastics. The device has an adequate sealing from any moisture and dust or debris. It also has a low profile, which allows for a neat and tidy installation.

The AD8058AR-REEL7 offers essential features for designing highly efficient and cost effective analogue signal amplifiers. It provides a 3-line-to-a-common topology, which includes low offset, wide bandwidth and low power dissipation. Also, it has the ability to support both single-ended and differential signals, as well as CMOS logic and TTL logic input. It has been tested and qualified by laboratory laboratories, which means that it meets the highest industry and internationally-recognized standards.

In conclusion, the AD8058AR-REEL7 is a perfect choice for any linear amplifier applications and instrumentation. It does an outstanding job of transferring signals, reducing noise, and amplifying video signals. Besides, it is simple to install, has a low profile, and offers superior balanced signals. All of these advantages make this device the perfect choice for anyone looking for a high-quality and cost-effective signal amplifiers.

The specific data is subject to PDF, and the above content is for reference