AD817ANZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The AD817ANZ is a versatile, single-supply, low-power operational amplifier (OP amp). It is a member of the AD817AN series of monolithic low-power OP amps, which includes a wide range of amplifiers from single-channel, single-supply, single op amps to dual-channel, dual-supply, dual op amps. The AD817ANZ is well suited for a wide range of applications which require low power consumption and low input bias current. It is particularly well-suited for use in instrumentation, linear and buffer amplifiers.

The AD817ANZ has an output voltage range of +/-5V, a maximum supply voltage of 3.6V, a minimum input voltage of 1V and a minimum supply voltage of 0.9V. It has a low input bias current of 0.1pA and a low offset voltage of 0.3mV. The amplifier also features Rail to Rail inputs and outputs and has a very low quiescent current of only 2.5uA.

The power supply rejection ratio (PSRR) of the AD817ANZ is outstanding at a maximum of 120dB, which ensures that the amplifier is stable and provides consistent and accurate output. The amplifier also features a low noise, wideband frequency response of 10Hz – 10KHz and a high slew rate of 10V/us for fast response times.

The AD817ANZ is well-suited for use in instrumentation, linear, and buffer amplifiers. In instrumentation applications, the AD817ANZ can be used to measure and monitor various signals such as temperatures, pressures, and voltages. It can also be used to amplify very low signals that have been picked up by sensors and to convert them into signals that can be read by monitoring equipment. The AD817ANZ can also be used in linear amplification applications as it is able to achieve high accuracy and stability. The amplifier can be used to amplify audio and video signals as well as other signals. The low quiescent current and low offset voltage of the amplifier also make it ideal for use in buffer amplifiers where it can be used to match the output impedance of one circuit to the input impedance of another circuit.

The working principle of the AD817ANZ is based on the basic Operation Amplifier (OP Amp) concepts. It has two input pins - one for the non-inverting input and one for the inverting input and an output pin. The two inputs are connected to the two differential stages of the amplifier and the input signal is then amplified and applied across the output pin. The output signal is then adjusted by the feedback network, based on the values of the resistors connected to the non-inverting and inverting inputs.

The AD817ANZ offers a wide range of features and performance capabilities which make it ideal for use in instrumentation, linear and buffer amplification applications. It has excellent PSRR, low noise, low quiescent current and low offset voltage. The amplifier is also very versatile, able to operate from a single supply voltage of up to 3.6V and can operate from a minimum of 0.9V. This makes the AD817ANZ an ideal choice for a wide range of applications.

The specific data is subject to PDF, and the above content is for reference