AD9117-DPG2-EBZ

AD9117-DPG2-EBZ evaluation board is a Digital to Analog Converter (DAC) that can be used to design a wide range of applications. It is designed with integration in mind, so the entire system can be assembled and powered in only a few minutes and provide the necessary level of flexibility required in applications such as Audio/Video, Automation, Data Acquisition, Motor Drive Control, and so on.

The AD9117-DPG2-EBZ contains a 16 bit pipeline D/A converter and a stereo DAC architecture with an integrated signal conditioning stage. The device also incorporates a fast power-up time of around 2.4 ms, along with a power-down feature which allows the system to be turned off within 15us by using the PWD command. The device is also capable of reconfiguring itself, so that if a design requires a different gain or a different reference voltage, the reconfiguration can be done without any external adjustment.

In terms of performance, the AD9117-DPG2-EBZ delivers a total distortion of 0.002% with a wide bandwidth of 20MHz. Its signal conditioning stage includes anti-aliasing features, enabling it to easily reduce the noise in the input signal, ensuring that the DAC output is a clean signal with optimal dynamic range and low THD. Moreover, the design offers superior linearity performance, operating with less than a +0.0015 % differential non-linearity error over the entire operating range.

In terms of power consumption, the AD9117-DPG2-EBZ operates on 1.8V and consumes 18mW during normal operation. The supply current for the device is 1.5mA typical at 25°C and is capable of operating at up to 105°C, making it ideal for environments where low power consumption and high reliability are important.

The AD9117-DPG2-EBZ evaluation board is a flexible and easy to configure board that is a great solution for applications that require a high-precision, low power analog to digital converter (ADC). The board allows a designer to quickly configure and test the ADC, enabling a fast development cycle. It features on board Signal to Noise Ratio measurement, enabling users to measure the SNR performance of the ADC. The onboard temperature sensors allow measurements of die temperature and board thermal behavior. The board is also compatible with Analog Devices’ EVAL-C and Bridge Software, allowing users to make further performance measurements while speeding up the evaluation process.

In summary, the AD9117-DPG2-EBZ Evaluation Board is a powerful device that provides fast reconfigurability, low power consumption, and high performance in a wide range of applications. The board simplifies the design process, enables measurement of device performance, and can save time and cost of development.