AD9832BRUZ-REEL7 Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Direct Digital Synthesis (DDS) is a digital signal generation technique that provides precise control of frequency, phase, amplitude, and waveform shape. A DDS system provides a high accuracy, low noise signal generation to be used when creating complex waveforms. DDS systems provide high flexibility for generating repeating waveforms for applications such as modulation, data acquisition, signal processing, and more. The AD9832BRUZ-REEL7 from Analog Devices is an example of a DDS system.

The AD9832BRUZ-REEL7 is a monolithic CMOS integrated circuit that provides low-power, low-noise signal generation. It has the capability to generate a continuous spectrum of sine, triangle and rectangular waveforms over a full-scale frequency range of 0 Hz to 20 MHz with a step resolution of 0.1 Hz. It also features on-chip features such as a 12-bit DAC, a 12-bit phase accumulator, 18-bit frequency accumulation, clock, power-on reset, and output amplifiers.

The AD9832BRUZ-REEL7 can be used in a wide variety of applications, from signal source signal source generation and synthesizers, to test and verification signal generation. It can be used for frequency modulation and phase modulation applications, such as cellular base station signal generation and speech synthesis. The AD9832BRUZ-REEL7 can also be used to generate waveforms for digital signal processing (DSP) and data acquisition systems, such as wavelet and Fourier transformation and digital communication systems.

In terms of operation, the AD9832BRUZ-REEL7 incorporates an on-chip Digital-to-Analog Converter (DAC) that converts a 12-bit digital word from an external source into a continuous waveform. The DAC can operate on a supply voltage as low as 1.8V. An internal phase accumulator provides for frequency sweep and phase change of the waveform, based on the input of an 18-bit frequency established by an external serial data. The waveform can also be amplitude modulated using the DAC output.

The output of the AD9832BRUZ-REEL7 is then amplified externally to create the desired voltage swing. This can be achieved by either increasing the drive current of the chip or by driving an external transistor. The amplifier is designed to provide a low output impedance to minimize loading on the chip, allowing for a wide frequency response and improved power efficiency. An external output divider circuit can be used to account for scenarios where the square wave output of the chip can exceed the allowable voltage range of the system.

In addition to its on-chip features, the AD9832BRUZ-REEL7 provides power saving features such as a low power-down mode that conserves power when the system is in idle state. It can also be used to develop a cost-effective system using a microcontroller as the main processor for waveform generation.

The AD9832BRUZ-REEL7 from Analog Devices is a cost-effective and low-noise Direct Digital Synthesis (DDS) system for generating precise waveforms. It offers the flexibility to create waveforms for various applications from frequency and phase modulation to test and verification. The AD9832BRUZ-REEL7 is low power, easy to use, and provides the programmability and accuracy for a wide variety of applications.

The specific data is subject to PDF, and the above content is for reference