Allicdata Part #: | 516-1842-ND |
Manufacturer Part#: |
ADA-4743-BLKG |
Price: | $ 0.00 |
Product Category: | RF/IF and RFID |
Manufacturer: | Broadcom Limited |
Short Description: | IC AMP DARL SI BIPOLAR SOT-343 |
More Detail: | RF Amplifier IC Cellular, PCS, WLL, WLAN 0Hz ~ 2.5... |
DataSheet: | ADA-4743-BLKG Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Series: | -- |
Packaging: | Cut Strip |
Part Status: | Obsolete |
Frequency: | 0Hz ~ 2.5GHz |
P1dB: | 17.1dBm |
Gain: | 16.5dB |
Noise Figure: | 4.2dB |
RF Type: | Cellular, PCS, WLL, WLAN |
Voltage - Supply: | 3.3 V ~ 4.3 V |
Current - Supply: | 60mA |
Test Frequency: | 900MHz |
Package / Case: | SC-82A, SOT-343 |
Supplier Device Package: | SOT-343, SC70 4-Lead |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
This paper will discuss the ADA-4743-BLKG applications and working principles in the RF Amplifiers. First of all, some basic knowledge about RF amplifiers will be explained.
RF amplifiers, or radio frequency amplifiers, are used to increase the power of the input signal, usually with the goal of sending the signal over long distances. RF amplifiers generally have an input signal with low power, and they are responsible for amplifying the signal so that it can be used in more applications. RF amplifiers are used in a variety of applications, such as radio, television, wireless LANs, and cell phone networks.
ADA-4743-BLKG is a class of RF amplifiers that is designed to be used in high-performance applications. The device is a monolithic microwave integrated circuit (MMIC) that has a wide linear operational range, which allows it to be used in a variety of applications. ADA-4743-BLKG offers a wide linear operation range from 2mW up to 60W, making it ideal for applications such as broadcasting, radar systems, or wireless communications.
The ADA-4743-BLKG is designed with a linear output stage for maximum efficiency and it has a wide gain range of 40-80dB, which allows it to provide very low noise operation for increased performance. The device has a high linearity of 60dB as well as low distortion levels of less than 0.1%, making it ideal for high frequency applications. Additionally, it has a low operating temperature of -25°C to +85°C, which makes it very suitable for extreme environmental conditions.
The ADA-4743-BLKG works by taking an input signal and amplifying it before sending it to the output stage. The amplifier first amplifies the signal, then sends it to a filtering stage, which filters out any noise in the signal before it is sent to the output stage. The output stage is responsible for increasing the power of the signal. Once amplified, the signal is then sent to the output.
The ADA-4743-BLKG is designed to be used in a variety of applications, most notably broadcasting, automotive, medical, and military. The amplifier’s high linearity and low distortion make it suitable for broadcasting, where the signal needs to be clear and undistorted. Additionally, the device’s wide gain range makes it ideal for automotive and medical applications, where noise levels must be kept to a minimum. The device is also suitable for military applications, where its high linearity and low distortion ensure that the signal remains clear and undistorted even under adverse conditions.
In conclusion, the ADA-4743-BLKG is a class of RF amplifiers intended for use in high-performance applications. The device has a wide range of features, such as a wide linear operational range, high linearity and low distortion, and low operating temperature, that make it suitable for a variety of applications, such as broadcasting, automotive, medical, and military.
The specific data is subject to PDF, and the above content is for reference
IC MMIC AMP LNA PHEMT 6-DFNRF Amplifier ...
MODULE GSMRF Amplifier IC CDMA, GSM, EDG...
IC PWR AMP HBT INGAP 8-MSOPRF Amplifier ...
MOD LNA GPS FRONT END 9MCOBRF Amplifier ...
IC AMP RF LDMOS 45W H33265-8RF Amplifier...
IC RF AMP 0.5W PA 1GHZ 16QFNRF Amplifier...