ADC1410S105F2-DB

Series:	--
Part Status:	Obsolete
Number of A/D Converters:	1
Number of Bits:	14
Sampling Rate (Per Second):	105M
Data Interface:	SPI
Input Range:	2 Vpp
Power (Typ) @ Conditions:	550mW @ 105MSPS
Utilized IC / Part:	ADC1410S105
Supplied Contents:	Board(s)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADC1410S105F2-DB is a type of analog to digital converter (ADC). It is used to convert analog signals to digital signals for data acquisition and processing. The main advantage of this type of ADC is its high accuracy, high resolution, and low power consumption.The ADC1410S105F2-DB is designed to convert single-ended or balanced analog signals with accuracy up to 10 bits in a single conversion. The device also has an adjustable gain control, offset control, and analog signal conditioning. It can also handle a maximum analog input range up to 5V.The ADC1410S105F2-DB is built with an advanced flash-based design providing pin-to-pin compatibility with a wide range of high-speed CMOS process technologies. It also features a conversion frequency up to 20 MHz and a sampling period of 125 ns. The ADC1410S105F2-DB supports both single-ends and differential-ends with low power consumption. Also, it has on-chip baseband digital filters (IIR) which can reduce the noise depends on filter settings from terminal pins.The ADC1410S105F2-DB can easily be integrated into a wide variety of applications, including communications, automotive, test and measurement, and consumer electronics. It is also suitable for high-precision signal processing because of its fast speed and high resolution. It can provide accurate bit-level performance from data acquisition and signal processing.In terms of working principle, the ADC1410S105F2-DB is based on multiple slave analog-to-digital converters (SF-ADCs) and one master ADC designed to operate synchronously. It has two ADCs operating in a master/slave configuration, including one DC-coupled master ADC and one AC-coupled slave.The DC-coupled master ADC is the main device used to perform the analog-to-digital conversion. It is responsible for setting the appropriate clock frequency and voltage range using a programmable internal clock. This device can be used to generate both a digital output and a control signal, which is used to control the slave AC-coupled ADC.The AC-coupled slave ADC is used to condition the analog signal before the conversion. It has an internal analog filter to reduce the noise and improve the signal-to-noise ratio of the data coming from the master ADC. It also performs the analog-to-digital conversion and sends the data to the master ADC for further processing.In conclusion, the ADC1410S105F2-DB is an evaluation board designed for analog to digital conversion. It features high accuracy, high resolution, low power consumption, and fast conversion frequency. It is suitable for applications such as communications, automotive, test and measurement, and consumer electronics. The ADC1410S105F2-DB is based on two ADCs operating in a master/slave configuration, one master ADC and one slave ADC, both of which work together to provide accurate bit-level performance from data acquisition and signal processing.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description