ADC1173CIMTCX/NOPB Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Data Acquisition, often referred to as DAQ, is a technology used in biomedical engineering, control engineering, robotics, and other fields, to acquire and process data from physical sources. An Analog to Digital Converter, or ADC, is a critical component in a DAQ system. The ADC1173CIMTCX/NOPB is a 10-bit, 500-kSPS, voltage output, low-power SAR (Successive Approximation Register) ADC.

The ADC1173CIMTCX/NOPB is used primarily in medical and industrial applications, as well as in consumer electronics. It is limited in accuracy, as its 10-bit resolution yields only four decimal places of precision. Nevertheless, it is still a viable choice for applications that require low power and low cost performance.

The ADC1173CIMTCX/NOPB operates using a Successive Approximation Register (SAR) analog-to-digital conversion method, which makes the device suitable for low-power applications. In the SAR method, the digital code that corresponds to the voltage input is determined by comparing it to a reference voltage, then adjusting the comparison until a specific digital code is reached. This is done step by step, from the most significant bit (MSB) to the least significant bit (LSB).

The ADC1173CIMTCX/NOPB is designed to consume very low-power while operating, using only 350µA at 1.8V, and averaging only 800µA of total power. The ADC1173CIMTCX/NOPB also uses an on-chip reference and temperature sensor, which enables long-term stability and temperature compensation within the device itself.

The ADC1173CIMTCX/NOPB has a single-ended, 0-to-2.5V input range. It also has a dynamic input range of -2mV to 2.5V, and a full-scale step size of 1.22mV. This relatively small step size makes it suitable for applications that require higher accuracy than other types of ADCs.

The ADC1173CIMTCX/NOPB features flexible power modes that allow it to be used in a wide range of applications. The power-down mode reduces the current supply to 0µA, reducing power consumption significantly, and the exit-to-idle mode allows for a quick return to the low-power state immediately after the analog-to-digital conversion completes. Adding to its power-saving capabilities, the ADC1173CIMTCX/NOPB also has an integrated programmable power sequencer, which enables it to be used in a multi-channel DAQ system while using only one power supply.

The ADC1173CIMTCX/NOPB is also designed to handle noise while providing excellent linearity and dynamic performance. It features a low noise floor with a wide signal-to-noise ratio (SNR), and a low integral nonlinearity (INL) of 0.25LSB. The ADC1173CIMTCX/NOPB also includes an integrated anti-aliasing digital filter, which allows for an optimal input line performance.

The ADC1173CIMTCX/NOPB is an excellent choice for a variety of applications, including medical imaging, industrial instrumentation, audio and data acquisition. It is a low-power, low-cost, and precision-oriented ADC that is ideal for those applications.

The specific data is subject to PDF, and the above content is for reference