ADM6710F-TESTRL7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADM6710F-TESTRL7 is a device designed by Analog Devices, Inc. that is used to provide supervisory and power management functions in many applications. It is a polyphase power supply supervisor that can monitor and control up to 11 voltages and has integrated undervoltage lockout for each of the supplies. It features hot-swap support for all supplies, adjustable thresholds for each of the 11 monitored supplies and overtemperature protection.

The ADM6710F-TESTRL7 has two different types of output: cycle-by-cycle and supervisory. The cycle-by-cycle output, also referred to as the ‘run enable’, is activated only when all of the monitored supplies are within their permissible voltage range. The supervisory output is activated whenever any of the monitored supplies is outside its permissible range. This output can be used to trigger an external event, for example, disabling the system or entering into a low power state.

The ADM6710F-TESTRL7 can detect if any of the monitored supplies have exceeded the set threshold or have fallen below the set threshold. Once this detection is made, the device will initiate a power down sequence in order to protect the system from any further damage caused by out-of-spec voltages. This power down sequence can be configured in four different modes: manual, pulse, inhibit and automatic. The manual mode allows the user to specifically control which monitored supplies will be powered down at what time. The pulse mode will power down only the supply that has exceeded the threshold and will reset to normal when the supply returns within spec. The inhibit mode disables all supplies once any of them exceeds its threshold and will remain disabled until the administrator manually enables them. The automatic mode enables the ADM6710F-TESTRL7 to automatically power cycle the system whenever any of the monitored supplies are outside the set range.

The ADM6710F-TESTRL7 features a powerful array of diagnostics to monitor the voltage outputs of the system. It has an array of onboard temperature sensors, voltage monitors, and a watchdog timer. The temperature sensors can be programmed to either alert the system operator if the temperature has exceeded the set threshold or to shut down the power supply if the temperature is too high. The voltage monitors can detect errors in the system voltage and can report these values to the operator. The watchdog timer is used to monitor the system’s operation and can activate a power down sequence if the system has not been providing reliable operation.

The ADM6710F-TESTRL7 is used in any system that requires a reliable power source in order to prevent damage done by out of spec temperature or voltage levels. This device is especially useful in applications such as data centers, high tech offices, and automated factories. The device is also used in mission critical applications, such as military and aerospace, where reliable and secure power is essential.

The ADM6710F-TESTRL7 offers an all-in-one solution to power management and supervisory needs. It offers protection from environmental hazards, enables monitoring of any system outages, and can provide alerts to the administrator if any critical voltages are exceeded. This device is the perfect choice for any application requiring reliable, safe, and powerful power management.

The specific data is subject to PDF, and the above content is for reference