ADM7008XA3T1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADM7008XA3T1 Controller is a single-chip 8 bit microcontroller used in consumer, industrial and automotive applications. It has a wide range of features and peripherals to suit a variety of applications. This article will cover the application fields, working principles and features of the ADM7008XA3T1 Controller.

Application Fields

The ADM7008XA3T1 Controller is suitable for a variety of applications, including consumer, industrial and automotive. In consumer applications, the controller can be used for controlling home appliances, such as air conditioners, refrigerators, washing machines and microwave ovens. In industrial applications, it is used for controlling a variety of machines, including robots and factory automation. Additionally, it can also be used for controlling automotive systems, such as powertrain and body electronics.

Working Principle

The ADM7008XA3T1 Controller consists of 8-bit flash memory, 8-bit SRAM, 8-bit EEPROM and 310-gate CMOS logic circuitry. It has a 32-pin dual inline package and is powered by a single +5V supply. The ADM7008XA3T1 controller is based on the RISC architecture, and its instruction set consists of seventy four instructions with low interrupt latency.

The controller has three timers, an 8-bit PWM module and a watchdog timer (WDT). It also has an 8-channel 8-bit A/D converter with an 8-bit resolution and an 8-channel 8-bit parallel port with an 8-bit data bus. The ADM7008XA3T1 controller can be configured to operate in two different modes, the P2 mode and the P1 mode. In P2 mode, the controller can operate up to 30 MIPS, while in P1 mode, it can operate up to 16 MIPS.

Features

The ADM7008XA3T1 Controller has several features that make it ideal for a variety of applications. It has two programmable clocks and an 8-channel 8-bit A/D converter. The controller also has an 8-channel 8-bit parallel port and can be configured to operate in two different modes. Additionally, the controller has an 8-bit data bus and can operate up to 30 MIPS in P2 mode and up to 16 MIPS in P1 mode.

The controller also has a built-in watchdog timer to prevent software failures. It also has the ability to execute interrupts in a single-cycle, thus reducing system latency. Additionally, the ADM7008XA3T1 controller is extremely power efficient, consuming only 3 mW in standby mode and less than 1 mW in Sleep mode.

The ADM7008XA3T1 Controller is an ideal solution for a variety of applications, including consumer, industrial and automotive. Its wide range of features and peripherals make it well suited for a variety of applications. The controller is based on the RISC architecture, and its instruction set consists of seventy four instructions. Additionally, it has an 8-channel 8-bit A/D converter, an 8-channel 8-bit parallel port, three timers and a watchdog timer, making it an ideal solution for a variety of applications.

The specific data is subject to PDF, and the above content is for reference