ADUM2400CRIZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

ADUM2400CRIZ is a digital isolator family made by Analog Devices (ADI). It can provide digital isolation of up to 1500Vrms between two relatively isolated circuits. This insulator family is composed of 18channels: 6doubles, 6triples, and 6quadruples. They are used in many applications such as medical, sensor, motor control, power supplies, I/O interface, consumer products and industrial controls.

Digital isolators are typically used to isolate two different circuits in order to protect each circuit from the effects of a malfunction in the other. They provide an effective alternative to optocouplers by allowing much higher speeds and improved reliability. ADUM2400CRIZ is a CMOS-based isolator and provides a low power system solution with improved common-mode transient immunity. The digital isolator outputs can be used to drive a logic input device which is isolated from other equipment in the system.

The working principle of ADUM2400CRIZ can be divided into two parts: firstly, the primary part contains an optically coupled LED and a photodiode, which couple a data signal with low power loss. Secondly, the secondary part contains an integrated circuit (IC) with a demodulator and driver. The demodulator recovers the digital signal, while the driver develops the output signal to a logic level.

ADUM2400CRIZ has many applications. It can be used to prevent ground loop issues that cause signal distortion, to protect circuit components from noise, and to minimize the electrical interference between two systems. Additionally, it can be used in medical equipment, automotive applications, power supplies, motor controllers, audio and video equipment, and industrial control systems.

The ADUM2400CRIZ family of digital isolators meets the requirements for creepage and clearance of insulation systems, as well as isolation voltage requirements of safety standards UL508, UL60950-1, IEC/EN60950-1, EN55032, IEC/EN62239-1 and IEC/EN60529 for use in power supplies and voltage sensitive circuits. It is also certified under CSA, CE, and TUV-EN electromagnetic compatibility standards.

ADUM2400CRIZ provides superior protection against surges, ground loops, transients, and noise. It is capable of high speed switching, up to 10Mbps, and has a wide operating temperature range of -40 °C to +125°C. Due to its small packing size it is useful in applications plagued by tight space constraints. Additionally, it can provide a low cost solution as many channels can be connected in one package.

In short, the ADUM2400CRIZ digital isolator family provides a cost-effective, high isolation-level solution which operates at high speed and under a wide temperature range. It is suitable for many applications and is designed to meet the requirements of UL, IEC, CSA, CE and TUV-EN safety standards. It can be used to prevent ground loops, to protect components, and to minimize electrical interference between two systems.

The specific data is subject to PDF, and the above content is for reference