ADUM3223BRZ-RL7 Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Isolators are used to increase safety, reduce noise, and provide communication separation between multiple electrical circuits. Gate drivers are a type of isolator which are specifically designed for semiconductor power switches such as transistors and thyristors. The ADUM3223BRZ-RL7 is an isolated 3-A gate driver designed for driving N- and P-channel enhancement-mode MOSFETs. It is used as a gate driver in a variety of applications, such as motor drives, lighting, and power conversion circuits. It also offers a wide range of features, such as overvoltage protection (OVP) for output (Vout) pins, overcurrent protection (OCP), and short-circuit protection (SCP).

The working principle of the ADUM3223BRZ-RL7 is based on digital isolation technology. It uses an opto-isolator to provide electrical isolation between the input and output of the device. The input side is powered by a DC voltage, typically +5V or 3.3V, and the output side is powered by the load voltage. When the input signal is active, the opto-isolator transmits a signal of equivalent strength between the input and output sides. This input signal is amplified and then used to drive the gate of the power switch.

The ADUM3223BRZ-RL7 features an analog standby mode, which allows the driver to be put into a low-power state when not in use. In this state, the output of the device is effectively disconnected from the load and the input pins, so no power is drawn from the input side and the output pins. This standby mode is especially useful for applications that require higher efficiency.

The ADUM3223BRZ-RL7 also provides a variety of protection features to ensure reliable operation and protect both the device and the load. The OVP feature provides protection against overvoltage on the Vout pins, while the OCP and SCP features protect against overcurrent and short-circuit conditions. The device also features a fault latch feature that detects a fault condition in the output and will latch the fault until a reset signal is applied.

The ADUM3223BRZ-RL7 is a versatile isolated 3-A gate driver that offers many features to help ensure reliable operation. It is suitable for a wide range of applications, such as motor drives, lighting, and power conversion circuits. Its features such as OVP, OCP, SCP, and fault latch ensure reliable operation and protection for both the device and the load. Its analog standby mode provides improved efficiency, making it an ideal choice for applications that require higher efficiency.

The specific data is subject to PDF, and the above content is for reference