ADUM6210BRSZ

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The ADUM6210BRSZ is a digital isolator (Isolation Amplifier) from the ADI circuit family that provides a galvanic isolation between digital devices. It can be used to increase data and control signal protection against electrical noise, transmission characteristics, protocol mismatch and transmission speed. With a maximum data transfer rate of 6Mbps, this isolator provides a greater amount of isolation and improved signal quality in harsh industrial environments. This isolator is suitable for applications where high isolation and noise immunity are needed, such as digital fieldbus interfaces, industrial automation and process control, distributed power systems, telecom systems, and safety systems.

The ADUM6210BRSZ isolator uses an Analog Devices\' patented iCoupler technology combining digital signal isolation with capacitive isolation. It enables efficient, low-loss and low-power data communication between two isolated systems. The ADUM6210BRSZ is a digital isolator with two independent channels that each include a transmitter and receiver. These channels facilitate bidirectional communication between two isolated systems while providing galvanic isolation. The isolation is achieved through transformer coupling, which also provides excellent noise immunity and improved signal quality. The transmitter and receiver are coupled through an isolated capacitor and connected to the corresponding device on the two isolated systems.

The ADUM6210BRSZ features a maximum data transmission rate of 6Mbps, a low propagation delay of 4.2ns, and a wide operating temperature range of -40°C to +85°C. It also has a self-power shutdown mode and a power supply of 4.5V to 5.5V. The isolator also features a 3.3V compatible logic interface and I/O compatibility with two-wire, three-wire, UART, synchronous (I²C or SPI) and CANbus standards. The ADUM6210BRSZ also has a transmitter output current of 8mA and a receiver output current of up to 4mA.

The ADUM6210BRSZ isolator provides excellent noise immunity with minimal data errors. It is suitable for use in industrial applications where electrical noise is present and signal integrity must be maintained. With its wide range of features, the ADUM6210BRSZ can be used in many different applications, such as factory automation, process control, distributed power systems, safety systems, and infrastructure networking systems. Additionally, this isolator can be used in two-channel isolation applications, such as connecting a motor driver to a controlling system in an industrial environment.

The advantages of the ADUM6210BRSZ digital isolator over other types of isolation include its low cost, small form factor, and reliable performance. It is also capable of transmitting high-speed digital signals at a rapid rate without compromising signal integrity. The ADUM6210BRSZ is an excellent choice for applications that require low power, low distortion, and robust isolation. It is an ideal solution for extending the range of data transmissions and providing reliable signal isolation.

The specific data is subject to PDF, and the above content is for reference