AF162-JR-073K3L

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Resistor networks and arrays of interconnected resistors are used in a variety of applications, such as transistor bias circuits, providing current sources, holding nodes at a fixed voltage, controlling frequencies in oscillator loops, and supplying linear potential division. The AF162-JR-073K3L is a single-inline passive network package containing four separate resistors amid resistors and a 16th type trimmer resistor. They are ideal for applications requiring a single package solution.

A resistor network is a low cost but very reliable electrical component that comes in a variety of shapes and sizes. It is basically a set of interconnected resistors connected in either series or parallel. By adjusting the connection pattern of the resistors, they can be used to divide an input voltage or current into different proportions and/or levels. Aside from being used as voltage dividers, resistor networks can be used to tune oscillator frequencies and other signal processing tasks.

The AF162-JR-073K3L is an 8-pin resistor network comprising four separate resistors and a trimmer resistor. Its main purpose is to accurately divide the applied voltage or current into four equal parts, with the fifth resistor (the trimmer) used to finely adjust the dividing ratio until the desired value is achieved. The resulting voltages or currents at the pins of the network are determined by the trimmer. The resistors can also be connected in series or parallel to create voltage dividers, current dividers, or other configurations that divide the applied voltage or current into various proportions.

The trimmer in the AF162-JR-073K3L resistor network is designed to operate in a linear fashion, in which a small change in the voltage or current applied to the trimmer will produce a linear change in the voltage or current output at the pins. This feature makes the trimmer extremely useful for applications where accuracy and precision is key, such as a high accuracy analog-to-digital converter or voltage regulator.

The AF162-JR-073K3L can also be used as a bridge network. In this application, the trimmer is used to adjust the divider resistors so that the input voltage is divided into two equal parts, one applied to the bridge resistor network and one to the load. This configuration enables the bridge resistor network to accurately measure the voltage across the load, allowing for the detection of small changes in the load voltage. This type of bridge network is also used for feedback control in power supplies.

The AF162-JR-073K3L is a single-inline passive network package with a wide range of potential applications, ranging from simple linear potential divider applications to complex power supply control feedback networks. Its linear trimmer enables the user to fine-tune the dividing ratio, making it an invaluable tool for accurate and precise voltage or current division. As such, the AF162-JR-073K3L is a valuable and versatile component for a variety of different applications.

The specific data is subject to PDF, and the above content is for reference